Remove the unnecessary full_x86_64 and full_mips64.

For historical reason, the aosp_* products were named full_*.
We keep the full, full_x86 and full_mips in case some tools still
reference these legacy names; But no reason the have the full_* product
names for the new 64-bit archs.

Change-Id: I240ed0c6ded0ded2d80603bd0c5ff24750999afc

target/product/AndroidProducts.mk

@@ -59,7 +59,6 @@ PRODUCT_MAKEFILES := \
     $(LOCAL_DIR)/aosp_arm64.mk \
     $(LOCAL_DIR)/aosp_mips64.mk \
     $(LOCAL_DIR)/aosp_x86_64.mk \
-    $(LOCAL_DIR)/full_x86_64.mk \
     $(LOCAL_DIR)/sdk_phone_armv7.mk \
     $(LOCAL_DIR)/sdk_phone_x86.mk \
     $(LOCAL_DIR)/sdk_phone_mips.mk \

target/product/aosp_mips64.mk

@@ -13,6 +13,20 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_mips64.mk)
 
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# mips64 build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
+
+include $(SRC_TARGET_DIR)/product/emulator.mk
+
+# Overrides
 PRODUCT_NAME := aosp_mips64
+PRODUCT_DEVICE := generic_mips64
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on MIPS64 Emulator

target/product/aosp_x86_64.mk

@@ -13,6 +13,33 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_x86_64.mk)
 
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+# If running on an emulator or some other device that has a LAN connection
+# that isn't a wifi connection. This will instruct init.rc to enable the
+# network connection so that you can use it with ADB
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
+
+include $(SRC_TARGET_DIR)/product/emulator.mk
+
+ifdef NET_ETH0_STARTONBOOT
+  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
+endif
+
+# Ensure we package the BIOS files too.
+PRODUCT_PACKAGES += \
+	bios.bin \
+	vgabios-cirrus.bin \
+
+# Overrides
 PRODUCT_NAME := aosp_x86_64
+PRODUCT_DEVICE := generic_x86_64
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on IA x86_64 Emulator

target/product/full_mips64.mk

@@ -1,32 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# mips64 build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := full_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS64 Emulator

target/product/full_x86_64.mk

@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-# If running on an emulator or some other device that has a LAN connection
-# that isn't a wifi connection. This will instruct init.rc to enable the
-# network connection so that you can use it with ADB
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-ifdef NET_ETH0_STARTONBOOT
-  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
-endif
-
-# Ensure we package the BIOS files too.
-PRODUCT_PACKAGES += \
-	bios.bin \
-	vgabios-cirrus.bin \
-
-# Overrides
-PRODUCT_NAME := full_x86_64
-PRODUCT_DEVICE := generic_x86_64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on IA x86_64 Emulator