Export BOARD_LIBACRYL_DEFAULT_COMPOSITOR, BOARD_LIBACRYL_DEFAULT_SCALER,
BOARD_LIBACRYL_DEFAULT_BLTER, and BOARD_LIBACRYL_G2D_HDR_PLUGIN to
soong. Also export one include path to sooong but check if the path
exist before export to soong due to soong does not allowed non-existed
path.
Bug: 370414334
Test: m libacryl
Change-Id: Ib7f7af43da0359e691dee8bd538664147704c648
To allow typing soong config variables as bools for using in soong
select expressions.
Bug: 323382414
Test: m nothing --no-skip-soong-tests
Change-Id: I39496cd2a3366689e3f232ba10353a7d56d8d1ed
Targets can switch on this feature by setting
MALLOC_SVELTE_FOR_LIBC32 := true
The default is to build libc32 with scudo enabled.
Change-Id: I207659af05412a8e7dc850d57b491ee565554a65
Allow building a76 with TARGET_2ND_ARCH_VARIANT set as armv8-2a
Change-Id: I620aa16d6cc563687d35916fc0cd56fb08f9ca71
Signed-off-by: Jason Edson <jaysonedson@gmail.com>
Signed-off-by: RITEFANG <1721985272@qq.com>
If BOARD_USES_RECOVERY_AS_BOOT is set to true, recovery.img is
not built.
If BOARD_CUSTOM_BOOTIMG is set, INSTALLED_RECOVERYIMAGE_TARGET
gets copied to BOOTABLE_IMAGES.
If both are set, the following error is produced.
acp: missing destination file
Since it is possible to have both BOARD_USES_RECOVERY_AS_BOOT and
BOARD_CUSTOM_BOOTIMG set, guard the copy operation so that it does
not try to copy a missing recovery.img.
Change-Id: Iae24e31a586e98955807d213df3dbaa0a2f13bae
Signed-off-by: RITEFANG <1721985272@qq.com>
* The current logic does not suit for multiple block devices case,
it generates split images hence output dir shall be specified
* Multiple block devices is possible with non-RDAP too, and it could
work for RDAP with single block device, so it's incorrect to depend
on RDAP flag
Change-Id: I8563b96b35351ef0a3b40ae172c2e904ee57f85e
Signed-off-by: RITEFANG <1721985272@qq.com>
This allows one to build *__auto_generated_rro_(product|vendor).apk
under $(PRODUCT_OUT)/(product|vendor)/overlay/ without having to
build the full partition image or do full android build.
Change-Id: I0c215ed7968e0cba348d344e00a014470ac37b6e
Signed-off-by: RITEFANG <1721985272@qq.com>
This allows adding android-info-extra.txt to OTA packaging folder
in case it exists in the target device tree, so that it can then
be used in conjunction with custom releasetools. Historically, devices
used to do assertions based on the modem version or even trusted zone
version in order to prevent flashing builds if certain conditions were
not met. That however, breaks `fastboot flashall` command since it looks
for the requirements set in board-info.txt.
With this, targets can define whatever non-standard requirements
in the newly introduced android-info extra file, keeping OTA assertions
in place and `fastboot flashall` command working without having to pass
`--force` argument.
Change-Id: I029d778b44be4d9d877701d05124451052a4b73c
Signed-off-by: RITEFANG <1721985272@qq.com>
In past, brillo_update_payload was unsparsing all images before putting
them in payload.bin, now we ought to unsparse them ourselves here.
Change-Id: I69baa71678f8116ed8e256bd629a1af9bad13ba8
Signed-off-by: RITEFANG <1721985272@qq.com>
* This is a required dependency of target-files-package
so that it can be built from a clean build.
Test: rm -rf out/target/product && m target-files-package
Change-Id: I89e60f47e3e2cd6029a92b1aca505acd9cf4645b
Signed-off-by: RITEFANG <1721985272@qq.com>
This is a squash of the following commits:
Author: Chris Soyars <ctso@ctso.me>
Date: Thu Dec 23 00:44:33 2010 +0100
Add otapackage support for backuptool
Change-Id: I512554c579d444067cd3ccbb0e6946a5eb6bc964a
Modular backuptool.sh. Executes backup and restore methods defined in arbitrary /system/addon.d/*.sh scripts.
* Copy backuptool.functions alongside backuptool.sh.
* Delete both from /system/bin as they are not useful there.
Patch Series
============
http://review.cyanogenmod.com/#change,13265
CyanogenMod/android_build
* edify generator
http://review.cyanogenmod.com/#change,13266
CyanogenMod/android_system_core
* permissions on /system/addon.d
http://review.cyanogenmod.com/#change,13267
CyanogenMod/android_vendor_cm
* 50-cm.sh reference backup script
* modular backuptool.sh
* support backuptool.functions used by /system/addon.d/*.sh scripts
Change-Id: I26b4907d28f49c69627699d2accd2f0fa2d1b112
update ota_from_target_files to handle mounting/unmounting for backupscript
backupscript should not be mounting/unmounting itself as it makes other
scripts have unexpected results (such as modelid_cfg, which expects /system
to be mounted)
instead have the ota script handle the mounting/unmounting
Change-Id: I94511f4147c624d975cb3ecbeaa8b0e98f63437c
build: Don't run backuptool on GMS builds
Change-Id: I5dde27f9d16b88049171db9805221d92e67f3e5d
Author: Tom Marshall <tdm@cyngn.com>
Date: Wed Apr 9 16:14:07 2014 -0700
build: edify: use set_metadata for backuptool
Also use saner permissions on backuptool.sh
Change-Id: I50742b51867aa358f5924b8dc208833092a35bd9
Author: Ricardo Cerqueira <ricardo@cyngn.com>
Date: Wed Nov 5 18:16:43 2014 +0000
ota: Include copies of the recovery scripts even if shipping in block mode
Author: Ricardo Cerqueira <ricardo@cyngn.com>
Date: Wed Nov 5 19:58:59 2014 +0000
ota: Fix recovery-script cleanups in block mode
Change-Id: Iadb480f8062cfb7a0e6c9024e32ac0d71a7481d7
Author: Arian <arian.kulmer@web.de>
Date: Wed Jun 17 12:35:16 2020 +0200
build: Disable backuptool on user instead of GMS builds
* Backuptool is not exclusively used for GApps but
also used by other things (i.e. Magisk), hence
it shouldn't be disabled on all GMS builds.
Change-Id: Ia95c6fed21d7bed5e2e0610aa94264edc1d02c80
Author: Davide Garberi <dade.garberi@gmail.com>
Date: Tue Sep 24 18:45:17 2019 +0200
releasetools: Move system mount handling to backuptool
* This allows the ROM to be flashed on any recovery, whether it mounts
system to /system, /system_root or /mnt/system like Q recovery
* Remove any type of system mount with static paths from updater-script
to figure out the path dinamically through backuptool
Change-Id: I7b33726305cb6f3eec146d26135f0081002a25dc
Author: Jesse Chan <jc@lineageos.org>
Date: Fri Jun 12 21:53:18 2020 +0800
releasetools: support dynamic partitions for backuptool
Change-Id: I4a04e52f64e307a9852d786aabf17975a020b4b8
Signed-off-by: Jesse Chan <jc@lineageos.org>
Author: Jesse Chan <jc@lineageos.org>
Date: Tue Jul 7 23:50:10 2020 +0800
backuptool: do not unmap dynamic partition after finished
Keep partitions mapped so users can install addons.
Change-Id: Ic70621986bf136775e686dc8cc690ce076485907
Signed-off-by: Jesse Chan <jc@lineageos.org>
Author: Alessandro Astone <ales.astone@gmail.com>
Date: Mon Apr 12 18:40:10 2021 +0200
backuptool: Map extra dynamic partitions for Addon.d V3
Change-Id: Ia8fa1963c722c5aa2987b947e4e919e19909a9a8
Change-Id: I2401d334d8e16d18d3770b339ec2c787dd8e477c
* Anything in OUT/install gets packaged up into the zip and extracted
to /tmp/install immediately after FullOTA_InstallBegin.
* Use /tmp/install in edify scripts and remove code related to using
and manipulating /system for install tools.
* Modified to support signing steps being split from build steps.
Package install files into target-files INSTALL path
Read from target-files for OTA package creation
From Change-Id: I64f919c2a757b5474f6cc5f82bd6c33c2a8b558a
* This also fully reverts commit 6a324ba and partially reverts
commit f388104 as the functions are still needed here.
From Change-Ids: I4911244ec9945d197d2b56d0d11eab6d2f7b6d3e
I4943e2e89ee5c810a63746c570dc5e31e95b8c53
Squashed with the following:
Author: LuK1337 <priv.luk@gmail.com>
Date: Wed Feb 19 02:14:59 2020 +0100
releasetools: Use 0oXXX instead of 0XXX for octal
* Fixes py3 syntax error.
Change-Id: Ia9ca6e392f43694ddf4c952b07bf159e8dead36e
Author: LuK1337 <priv.luk@gmail.com>
Date: Fri Nov 13 15:27:24 2020 +0100
Add $(PRODUCT_OUT)/install to INTERNAL_RECOVERYIMAGE_FILES
* Fixes $(PRODUCT_OUT)/install not being included on targets
not providing their own /vendor || /system/vendor.
Change-Id: I15b8305bb7efacfcf3018708bf7ff8b8500744fb
Change-Id: I315a3238e36c8d15e26f935e272f7e27dd59c320
Without the -d $(TARGET_OUT) option for mkbootfs, only the
compiled-in fs_config (from AOSP) is used for the generated
ramdisk image. Device-specific additions are ignored.
This is why AOSP sets this option for both the boot- and recovery
ramdisk [1]. However, the option was removed for the recovery ramdisk
in review.lineageos.org/c/LineageOS/android_build/+/222722
This causes device-specific fs_config additions to be ignored when
generating the recovery ramdisk, potentially setting the wrong
permissions.
[1]: android.googlesource.com/platform/build/+/refs/tags/android-9.0.0_r37/core/Makefile#1388
Change-Id: I0f77a49d8b2f08791e60b34ddbb6f3b32bc2f0bc
Add support for optional device tree image (dt.img)
to boot and recovery images. Some devices use kernel device
tree and this adds the device tree image as a section within
the boot/recovery images.
Change-Id: I91431ef2f4b86485895678916e39a8572be878eb
Build: add DT image variable to Makefile
DT image variable is currently present in
generate_extra_images.mk.This file is moved to
build/tasks to support persist image generation
during parallel make. As build/tasks is called
at the end of Makefile, DT image variable is not
available for other images generation like boot and
recovery. Adding this variable in Makefile ensures
the variable is defined before usage
Change-Id: I21f675d8ce648dc1cf1f4f3aede33278300e08c9
CRs-fixed: 548299
Fix case where boot/recovery.img were being built with wrong params.
The boot and recovery images now get built using the same params during ota package
generation as during a normal build.
Change-Id: I93d46e11a4245288f0e87c87a2e4bf45ac5aff69
Fix the extra dt.img compilation issue.
Add support for optional device tree image (dt.img)
for device that doesnt have TARGET_BOOTIMAGE_USE_EXT2
Change-Id: I6e07b3ca6d049a8ebdad7ea304b4f39e7c846151
releasetools: Store and use the dt image file through target files
Target files packages may be used for signing images separate from the
build process. Store the device tree image file in the target files
package so it can be used during the signing process.
Change-Id: Ie8507121fa9c4ba57ecffeab05bd859ae5f5b788
This is a combination of 2 commits.
This is the 1st commit message:
Add BOARD_CUSTOM_BOOTIMG_MK support
Simplified version of the previous implementation. Recovery's ramdisk
is spun off from the main recovery target again to allow overriding
just the image-generation step
[mikeioannina]: Squash cm-13.0 changes and adapt to N
Change-Id: I058d214f0cf2d05b7621b369ef1f8a983c3ac258
This is the commit message #2:
build: Handle custom boot images properly
When a pre-built image should be used, it should be stored in the
target files zip so that it can be used with external signing
processes.
Original-Change-Id: I2661af9ac58af30bb9314b552775046d3abf44e0
Change-Id: I10b3bd0bb33489b8ffb26d16d002f8dd6ff405ad
[aleasto]
Rewritten for R, where the recovery ramdisk is created via
make dependencies, rather than $(call)s
[mainey]
Adapt to new flag INTERNAL_RECOVERY_RAMDISK_FILES_TIMESTAMP
Change-Id: I058d214f0cf2d05b7621b369ef1f8a983c3ac258
Author: Ricardo Cerqueira <cyanogenmod@cerqueira.org>
Date: 2011-04-12 10:57:22 +0100
Allow a device to generically define its own headers
We have a few cases of devices including specific versions of projects
just because of modified headers (msm_mdp.h comes to mind), and I just
had enough of ifdeffing header files for specific cases (the P990 needs
a lot of these).
Now... if a target defines a TARGET_SPECIFIC_HEADER_PATH, any headers in
there will take precedence over the standard ones; for example, on the
p990, I have
TARGET_SPECIFIC_HEADER_PATH := device/lge/p990/include
which makes, for example, the
device/lge/p990/include/hardware_legacy/AudioHardwareInterface.h be
used instead of
hardware/libhardware_legacy/include/hardware_legacy/AudioHardwareInterface.h
whenever a source file uses <hardware_legacy/AudioHardwareInterface.h>
Change-Id: I41b62668b60e3f62a6ebd3738d8d2675103a81e6a
build: fix target header overlay
LOCAL_C_INCLUDES as defined by the makefile should be put AFTER
the overlay includes so the overlay always takes precedence.
Change-Id: I489b2aab6dbacd9122d834f85e07b63ed1271f07
Author: Jan Altensen <info@stricted.net>
Date: 2020-09-10 15:18:49 +0200
soong: add TARGET_SPECIFIC_HEADER_PATH
Change-Id: I582ae8e6e010016b33fd9b020b723e5fc2dc442b
Change-Id: I3c885fe504ce4f646001697119cffd674db9ec49
AOSP wants to show localized menus for rescue party and
format data. To achieve that, they produce at compile time a big
PNG file with rows of localized text. The runtime would then pick
the correct row to draw.
In order to customize our recovery UI we cannot draw pregenerated
text. Avoid generating these files to shrink recovery size.
(Saving 2.3MB on xxhdpi!)
Change-Id: Id38d239254f17eeed5491621865c747a8496ed83
The foreach loops output a space separated list, not necessarily one
command per line. Separate commands with semicolons. Notably, this
fixes an issue with multiple device directories included in
TARGET_RECOVERY_DEVICE_DIRS.
Change-Id: I5ebdc84ecaaacabaea77b8b752141e2041622480
Set in board file with TARGET_OTA_ASSERT_DEVICE.
(cherry-picked from commit 0f452f21fc9323b9d1fe746161761cf40aaa5030)
Change-Id: I3d06bdc0e3e26bde0c0e646accd050364f9713b9
ota_from_target_files: Remove device dependent arguments
These device-specific arguments are defined at build time and are
necessary to generate the zip correctly. Don't use command line
arguments to specify them, but write all the needed information
in misc_info.txt when the target-files zip is generated.
ota_from_target_files will then read misc_info.txt and set
everything automatically.
Change-Id: Ibdbca575b76eb07b53fccfcea52a351c7e333f91
Signed-off-by: André Pinela <sheffzor@gmail.com>
This is a combination of 3 commits.
This is the 1st commit message:
build: add kernel header dependency if module uses kernel headers
Many of the QCOM components use kernel headers, but don't declare
the dependency on them. This is fine in CAF because of the way they
build the boot.img before anything else. In CM, we don't build the
boot.img the same, so we run into a race between the kernel build &
these modules... and the modules lose.
Warn about modules that have this missing dependency, and add it for
them so we don't have to modify each Android.mk.
Change-Id: I95f1e47b5ef440f6f5d8f64a0c3f38d9572e839e
============================================================================
This is the commit message #2:
build: Switch kernel header inclusion
The build is switching to the target INSTALLED_KERNEL_HEADERS to
declare dependencies on kernel headers.
Change-Id: I913e74681b02dfcf1eaed3d1e47ff4ab2300b12d
============================================================================
This is the commit message #3:
build: Automatically replace old-style kernel header includes with new header lib
Since we do this via soong and the result is a header library, just replace all
legacy include paths that point to the old header location with calls to the new
header library. Since we no longer have the legacy include, we can also remove
the additional dependency.
This reverts commit fa798218e5b7f96e12ab3acc9d47a3f26a140777.
Change-Id: I716955534e50831e6568ca01e480aa8b90075d92
Squashed also with the following changes:
Author: Luca Stefani <luca020400@lineageos.org>
Date: Thu Aug 17 22:22:13 2017 +0200
core: Include PixelProject pathmap
Change-Id: Ie25dee383cc5bc9bb6390cff2cb2460d526d80b6
Author: Simon Shields <simon@lineageos.org>
Date: Fri Mar 2 12:55:47 2018 +1100
build: unconditionally use PixelProject pathmap
even if we're not building a pixelproject target, we need to
use the pixelproject pathmap to make things like recovery and ril
happy
Change-Id: I974c30ad10d4ff5b7805c3df9c22010f1e002bf1
Author: Luca Stefani <luca.stefani.ge1@gmail.com>
Date: Tue Jan 22 15:50:52 2019 +0100
Don't export BUILD_NUMBER in envsetup
* The value is meant to be set only before running an /official/ build
* This allows us to execute consecutive make commands without
running kati for every invocation
Change-Id: Ifa94b839f30c7260009c8a3c91c202b50e28022e
Author: Luca Stefani <luca020400@lineageos.org>
Date: Fri Aug 18 10:17:00 2017 +0200
envsetup: Call fixup_common_out_dir
Change-Id: I84e16b0df5822cfd8514c46d709109a13c20f86e
Author: Adrian DC <radian.dc@gmail.com>
Date: Sat May 12 11:24:33 2018 +0200
build: Include PixelProject specific properties in build.prop
* Our properties were supposed to go to /system/etc/prop.default
after the following commit:
"pixelproject: Move to Google's method of defining system default props"
Change-Id: I6cb0e28a7599b010b389cc541015a37010a00f4b
* However if BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED is not true,
only /default.prop will retain the properties contents of
ADDITIONAL_DEFAULT_PROPERTIES and PRODUCT_SYSTEM_DEFAULT_PROPERTIES,
and none of our versioning identification was held in the system
* Enabling BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED globally would
break all properties on devices that handle partitions usually
at the device level rather than the kernel due to mounting races
* Include the vendor/aosp/config/main.mk entrypoint to be allowed
to extend ADDITION_BUILD_PROPERTIES as we need to define our releases
Change-Id: I19918eece0f0dd3ee967db0339b4d09c9a6d540e
Signed-off-by: Adrian DC <radian.dc@gmail.com>
Author: Rashed Abdel-Tawab <rashed@linux.com>
Date: Thu Sep 5 21:35:38 2019 -0700
core: Only include PixelProject SE policy if repo exists
Change-Id: If799106d2da6d8c303430e316edff365a22f7c99
Author: dianlujitao <dianlujitao@lineageos.org>
Date: Thu Sep 5 21:56:36 2019 +0800
product: Exclude AOSP apn list on PixelProject build
Change-Id: I1fd10089421a2e4b57ef565d87ad1f6036bd1898
Author: Michael Bestas <mkbestas@lineageos.org>
Date: Fri Apr 12 02:10:12 2019 +0300
build: Conditionally include AudioPackage14.mk instead of AllAudio.mk
* AllAudio.mk doesn't contain latest material files and also
contains multiple duplicate files. Just copy the latest
material ones and we'll include the older files in vendor/aosp
Change-Id: Ic7353216a3f3dc3c51006d951ac932cfd6e5f3b5
Author: dhacker29 <dhackerdvm@gmail.com>
Date: Sat Jun 6 22:22:05 2015 -0400
Remove LatinIME as it is included per target in vendor/aosp
Change-Id: Ibce4a244ec0653a7c7798d864047ac667866a1dc
Author: razorloves <razorloves@gmail.com>
Date: Mon Oct 7 05:10:56 2019 -0500
build: Remove su inclusion
This stops including su in all pixelproject userdebug/eng builds.
Inclusion of su is conditionally handled in /vendor/aosp.
Change-Id: Ia3ad978146f170a2b260d77afe9eb580d4b4f823
Author: Michael Bestas <mkbestas@lineageos.org>
Date: Sat Nov 7 22:45:12 2020 +0200
Stop including vendor specific clear_vars.mk
vendor/aosp/build/core/clear_vars.mk is no-op since 16.0
Change-Id: I7e159cc9ed5a838c9a04c1a8b7dcf925d83f0e20
Change-Id: Iab8b2ef8b644a7bea10bfd28b99d9e69539b1357
Signed-off-by: RITEFANG <1721985272@qq.com>
