Test: Build the following targets and check the built image archive.
bonito-userdebug (contains flashable images);
cf_x86_phone-userdebug (contains super.img);
aosp_arm64-eng (contains VerifiedBootParams.textproto)
Test: m -j otatools-package; Check that zip2zip is included; Use
bin/img_from_target_files to generate image archive.
Change-Id: I9f28765bd702849f0df309faebd6aa3072920536
OEMs may need to have different device configurations that use different
signing configurations for mainline modules. The network stack mainline
module has a sepolicy context referencing its certificate, so the
generated plat_mac_permission.xml differs based on the module signing
configuration.
The added PRODUCT_MAINLINE_SEPOLICY_DEV_CERTIFICATES variable defines a
per-product directory for the certificates, so that which certificate to
use can be configured in the product makefile, instead of replacing the
certificate file itself.
This change is to be submitted together with another change in sepolicy
makefile.
Test: changed certificate path, m, verified plat_mac_permissions.xml has
new certificate.
Bug: 134995443
Bug: 138097611
Change-Id: I863a9904d4a2ea2abad679ae0969d50e374f269d
These two tools are only used within build system, so not adding them
to otatools.zip.
Bug: 63866463
Test: TreeHugger
Test: Build a non-A/B target that calls make_recovery_patch.
Change-Id: Iaeddc98a2c4a27c6b49d91047500029e460db9e3
Bug: 63866463
Test: TreeHugger
Test: m -j otapackage
Test: `m -j otatools-package`. Check bin/ota_from_target_files is
available. Build an OTA package with standalone otatools.
Change-Id: I533dee1c6997d233601e7f4eae637ff5743ed637
Now that mm/ONE_SHOT_MAKEFILE have been removed, we can expect to know
about all of our dependencies at the end of the build.
This removes 19k nodes from our build graph (aosp-master
aosp_arm64-eng), though in a default build, only 3k of those are used.
Test: ALLOW_MISSING_DEPENDENCIES=true, then trigger a missing dependency
Test: treehugger
Test: create link_type files, then apply CleanSpec.mk, ensure they're removed
Change-Id: I9506331e4a9911d2f26e59a2f72a97aef1644073
The build servers are no longer using this. It's hard to search for
others using it -- I've cleaned them up as I've run across them, but
we'll just have to see who breaks once this goes in.
This was the last user of makeparallel, so we can remove it.
Test: make
Test: treehugger
Change-Id: If6df3f1a67d6a6df36afaa4b07cd88a48a364fe1
environment variables.
Test: Built aosp_arm-user with and without USE_RBE. With USE_RBE,
used a simple proxy script in place of rewrapper.
Change-Id: Ifb6bfd9f7292346f4750a6a409aa0def4e3c0363
This CL changes the condition for building super_empty.img from
PRODUCT_BUILD_SUPER_PARTITION to PRODUCT_USE_DYNAMIC_PARTITIONS, as a
follow-up to the change in [1].
With the CL in [1], it skips building super.img and super_empty.img both
when turning off PRODUCT_BUILD_SUPER_PARTITION. However, the latter
should be mandatory whenever dynamic partitions is enabled. Because
fastboot relies on this file to properly flash dynamic partitions. Plus,
the cost for building super_empty.img is much lower than the one for
super.img.
As part of the change, it'll write group info into target_files when
building with PRODUCT_BUILD_SUPER_PARTITION == false. It's the work for
target_files merging script to determine the values to be picked up. The
current logic in merge_target_files.py always uses the one from vendor
target_files. This CL adds a testcase to ensure the behavior.
[1] https://android-review.googlesource.com/c/platform/build/+/928756
Bug: 135752763
Test: `m dist` with a target that sets PRODUCT_BUILD_SUPER_PARTITION to
false. Check the built artifacts contain super_empty.img. Verify
that the build can be flashed properly.
Change-Id: I277f087eab45663a6c3b33333d16e9e576c1c25c
The dependency on MAKE_EXT4FS (mke2fs) has been covered by the rule for
MKEXTUSERIMG (mkuserimg_mke2fs):
https://android.googlesource.com/platform/system/extras/+/refs/heads/master/ext4_utils/Android.bp
The dependency on mksquashfs and img2simg comes from mksquashfsimage.sh,
which has been moved into mksquashfsimage's building rule.
This CL also fixes the ordering of INTERNAL_USERIMAGES_BINARY_PATHS,
which should come after adding all the binaries to
INTERNAL_USERIMAGES_DEPS.
Test: TreeHugger
Change-Id: I8b30bf87860d9711e88eecca4b76db72f5cd8241
Previously, setting PRODUCT_BUILD_SUPER_PARTITION to false for a partial
build (with PRODUCT_USE_DYNAMIC_PARTITIONS == true) would fail to
include necessary keys in misc_info.txt that are required when merging
two partial builds to create a dynamic-partition-enabled mixed build.
This change ensures these necessary keys are included even when
PRODUCT_BUILD_SUPER_PARTITION is false. Setting
PRODUCT_BUILD_SUPER_PARTITION to false causes partial builds to skip
building super.img and super_empty.img, instead relying on these images
to come from the final merged build.
Bug: 134764140
Test: Building & booting a dynamic-partition-enabled mixed build, and
inspecting partial builds' logs / out folder to ensure that
super.img/super_empty.img were not created.
Change-Id: I99431a9a342e9b0617510e250597f3024ef39322
These were found when trying to run remotely on RBE with only the
sources depended upon available for each rule.
Bug: 130111713
Test: treehugger
Change-Id: Id763f8fc7dfbe60445f98604db3422147165f537
Bug: 34254109
Test: TreeHugger
Test: Define PRODUCT_STATIC_BOOT_CONTROL_HAL and see the expected
failure after lunch.
Change-Id: I914b84e874fe14a25dcfe56b282c56f88934d07c
