Ie7daa94e107d53eff075ca58dbe721bd9d7fc8c2 attempted to pre-create
the directories that unzip would unzip into, but incorrectly
created them in the top of the source tree instead of in
$(PRODUCT_OUT). Fix the directory location and add a cleanspec
to clean up the incorrect directories in the source tree.
Bug: 119412419
Test: m correctly cleans up incorrect directories in source tree
Test: extract unzip command from out/verbose.log.gz and add bash -x
Change-Id: Ica006a007d112c232311435aaac0c0e476232b67
unzip sometimes fails with:
checkdir error: cannot create out/target/product/.../system/framework/oat
File exists
I think this happens when two unzips run in parallel, see that the
parent directory is missing, race to create it, and then one of them
treats the EEXIST when creating it as an error instead of continuing.
Work around this by creating the directories with mkdir -p before
running unzip.
Test: m installclean && m
Bug: 119412419
Change-Id: Ie7daa94e107d53eff075ca58dbe721bd9d7fc8c2
uncompress-prebuilt-embedded-jni-libs uses zip2zip, add a dependency
to the rule that calls it.
Test: treehugger
Change-Id: I39d580999947ee54cfefe875b57a028be5333bd7
This prints the uid map in a very simple format, with
AID_CONSTANT<space>uid
on each line. This is super easy for other tools to
parse, and generate their own mappings, without requiring
edits to fs_config_generator.py itself.
Test: make, treehugger
Change-Id: I10e24ac29d440a24d43580880343d122ae1cdf02
build_super_image.py calls `lpmake` and expects that (i.e.
HOST_OUT_EXECUTABLES) in PATH. However, we have to explicitly set up
that inside the build.
Bug: 120553014
Test: Set OUR_DIR and build blueline-userdebug.
Change-Id: I000f9d069902a902c9504a2ba31dba6dbc6917a2
BOARD_USES_<X>IMAGE is not equivalent with that image actually
existing. Since these targets depend on the INSTALLED_<X>IMAGE
variables being defined, gate the conditionals on that instead.
This logic is used in other places in Makefile
Bug: 120974093
Test: make
Change-Id: I6766042c801bf7fddc4b84671dbe5d3a157aea6b
Move the dexpreopting logic into Soong. Make modules will be
dexpreopted by executing the Soong logic in the standalone
dexpreopt_gen binary, which will generate scripts that will
perform dexpreopting for each module. Export global configuration
as JSON to $OUT/dexpreopt.config, which will be used by
dexpreopt_gen and Soong, and per-module JSON configuration that
will be used by dexpreopt_gen.
Bug: 119412419
Bug: 120273280
Test: no differences to dexpreopt outputs on aosp_sailfish system/,
only expected changes to dexpreopt outputs on system_other
(.vdex files for privileged Soong modules no longer incorrectly
contain .dex contents).
Change-Id: I59b20c931ee3e5a8d35eb30da4148691c5095502
We will call it at an earlier time to compute the patch size; and
choose the transfers to convert to 'new'.
Bug: 120561199
Test: Generate an incremental update on shiner
Change-Id: I29a0c8e75c9e5b66a266c1387186692a86fcbe43
For go devices, the network stack should not run in a separate process:
NetworkStackLib is used in-process instead.
Test: built & booted a go and non-go config
Bug: b/112869080
Change-Id: I18b0446a0c0d19519ce0ef344f185b54ad7d4ac6
Add a LOCAL_SANITIZE_NO_RECOVER variable that allows specifying which
sanitizers running in diagnostics mode shouldn't recover. This can help
debugging as we test enabling sanitizers in new libraries since it'll
cause tombstones to be generated along with the diagnostics information.
Bug: 80195448
Bug: 110791537
Test: Compiled test module with this flag, checked compiler command.
Test: Test module crashed, tombstone contained diagnostics information.
Change-Id: I441b9c873e54bf6404325f4d0ac59835350c2889
The code to manage citing empty <partition>/etc/fs_config_{files|dirs}
content by specifically setting the file(s) to access mode 00000 is
bitrotted and ill-suited for multiple partitions and was written for
a more paranoid time when DAC and MAC rules were not nearly as mature.
Striking out the complications as it affected deterministic results.
Test: compile and boot
Bug: 119310326
Change-Id: Iec02e0c1194eaa799ab95adff4ff0951a24652a4
Needed to get some space on marlin-eng :(
Also avoids static linking libart into perfprofd. Roland will follow-up by reverting the no-perfprofd changes.
bug: 73175642
Test: lunch marlin-eng && m -j32
Change-Id: Ic1c79c6dd1052981801b92604f9891a8a63b4ea0
A function name with dashes is apparently not universally recognized
by shell versions/variants(?). Using underscore in place of dashes
solves this problem.
Test: ./development/vndk/tools/header-checker/utils/create_reference_dumps.py -l libGLESv1_CM
Change-Id: Id7d701600760140dae9e4762a11f4abd64947d10
Generate the images for recovery's wipe data menu. And use the lossless
tool zopflipng to compress the generated image. This saves space
in the boot image at the cost of the increase of build time. In practice,
it adds about ~20 seconds to build the bootimage with 32 threads.
zopflipng generally runs slower. Even with a predefined filters
strategy, it runs about 3 times slower than pngcrush, e.g. ~40s vs 15s
to compress a 1.8M png file. However, zopflipng also gives a better
compression: ~1.4M vs 1.6M for the same image. So I guess the time
consumption is a price worth paying.
Bug: 74397117
Test: build the bootimage and check the resource images
Change-Id: I3e71f8bedd3c183a3374b1a9464bf05500e1aa61
We've already added new APIs in Q, so we shouldn't be claiming a
value of "0", which signals a production platform release.
Bug: 120797950
Test: manual
Change-Id: I6c9063ac4ace79b3ee6b1c67ccdf76f4063ad165
* The include directive is ignored for now here.
Bug: 112259977
Test: ./checkowners.py -v -c OWNERS
Change-Id: I671f3643ea88e50aea0957db59c36f10bff3b92d
For some internal branches, vendor.img isn't built, so there
is no need to build super image / super split images there.
Test: remove vendor.img and VENDOR/ from target_files_intermediates, then
run add_img_to_target_files
Fixes: 120634805
Change-Id: I2834a27ce232538f203733c204dd257279c789fc
Usage:
...aosp/$ gomod libbase
...aosp/system/core/base$
Using in alias:
alias g=gomod
complete -F _complete-android-module-names g
...aosp/$ g libbase
...aosp/system/core/base$
Nothing in Android keeps an up to date index of all Android modules
and their locations between builds. However, there is a target
'module-info.json' which is used to contain some of that information.
This module can be updated using the command 'refreshmod' added
here, but it will also be updated during a normal Android build.
This also adds auto-complete for m.
Bug: N/A
Test: manual
Change-Id: I06b0b87c308b9fe2798dbc29225906cc30fe59fe
The final APK may contain compressed or uncompressed dex files,
and this affects dex2oat compilation.
Test: build sailfish, test that SystemUI.vdex and Settings.vdex
don't have the dex code.
Change-Id: Ic032f61ed67dcdf342f6eaef71d805b89d6fc99a
Mechanical extension of mount directories to also support product/
and product_services/ as individually supplied images.
NB: In the distant past, a prototype placing the make rules into a
macro was rejected as too difficult to maintain within the macro
rules, so rules are rolled-out to make them easy to understand.
Test: compile
Bug: 119310326
Change-Id: Ief137cbe62db7175ee02275804ff1d644858dc3d
