Build support exists to copy a set of kernel modules to the recovery,
vendor, and odm images. Extend similar support for copying kernel
modules to the ramdisk via BOARD_RAMDISK_KERNEL_MODULES. If
BOARD_USES_RECOVERY_AS_BOOT, then BOARD_RAMDISK_KERNEL_MODULES is
added to the set of modules to be copied to recovery.
Libmodprobe now supports reading a list of kernel modules to be loaded.
Enable the creation of modules.load and modules.load.recovery files.
These files contain the contents of
BOARD_[RAMDISK|VENDOR|ODM|RECOVERY]_KERNEL_MODULES_LOAD, or if those
variables are not set, the contents of
BOARD_[RAMDISK|VENDOR|ODM|RECOVERY]_KERNEL_MODULES (indicating all
modules should be loaded by default). This allows for
optional customization of the set of modules to be loaded by
libmodprobe and the order they are loaded in.
Bug: 130585369
Change-Id: I9340787d31d71aebc8552344675d9696c189a8a1
This variable was accidentally changed to refer to the
shorthand PRODUCT_XYZ instead of PRODUCTS.<mk>.PRODUCT_XYZ
in a previous mass-migration, but that shorthand didn't
exist for these variables. Add it in.
Also whitelist the offender introduced since it was broken.
Test: lunch generic; m nothing
Change-Id: I29dd73c29796743e770afa0c2ceb4f8583dc6e1e
- `--block` has been a no-op since Oreo [1] -- ota_from_target_files
will always build block-based OTAs or A/B OTAs.
- MKBOOTIMG is no longer needed when calling ota_from_target_files, at
least for the callsite in Makefile. Because target_files.zip has been
including boot/recovery images since Lollipop [2].
This CL also switches to long options to improve readability.
[1] commit 457cbf6a8a
[2] commit 3c84f56948
Test: TreeHugger
Change-Id: I801bd0525d2529156bbf783698661d90ba24017a
lpunpack is needed to repackage super.img for mixed-image virtual devices.
For Cuttlefish, it's included in host package. We need to include it in
otatools.zip so Goldfish or other devices can use it to mix their super images.
Necessary SOs are the same as lpmake and have been included in otatools.zip.
Bug: 134461288
Test: $ lunch aosp_x86-userdebug
$ m otatools-package
$ unzip -l $OUT/ota* | grep lpunpack
467824 2008-01-01 00:00 bin/lpunpack
Change-Id: Ie2092f18afb88721b29b1738847a0b781dbcd431
The dependency on MAKE_EXT4FS (mke2fs) has been covered by the rule for
MKEXTUSERIMG (mkuserimg_mke2fs):
https://android.googlesource.com/platform/system/extras/+/refs/heads/master/ext4_utils/Android.bp
The dependency on mksquashfs and img2simg comes from mksquashfsimage.sh,
which has been moved into mksquashfsimage's building rule.
This CL also fixes the ordering of INTERNAL_USERIMAGES_BINARY_PATHS,
which should come after adding all the binaries to
INTERNAL_USERIMAGES_DEPS.
Test: TreeHugger
Change-Id: I8b30bf87860d9711e88eecca4b76db72f5cd8241
`PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH` will
produce a space separated string due to `foreach`, if
$(INTERNAL_USERIMAGES_BINARY_PATHS) has more than one string. We didn't
hit the issue in the past because $(INTERNAL_USERIMAGES_BINARY_PATHS)
had contained only one path in practice.
Test: TreeHugger
Change-Id: I74ef4356668af63d871a81f6bfd4c9324aa1d956
BOARD_PREBUILT_BOOTIMAGE is set.
Based on current Makefile INSTALLED_BOOTIMAGE_TARGET always kept as
empty if TARGET_NO_KERNEL is true, so build fails with empty out path.
This change is to set up INSTALLED_BOOTIMAGE_TARGET with
$(PRODUCT_OUT)/boot.img in case of TARGET_NO_KERNEL is true and
BOARD_PREBUILT_BOOTIMAGE is defined.
Bug: 135648566
Test: m -j passed
Change-Id: I9658f215c2e2cc5d87040d5085521ef44722c4ef
Don't pass --legacy by default, it is rarely necessary and converts
some errors into warnings that crash at runtime. The modules that
need it have had --legacy added to LOCAL_AAPT_FLAGS.
Bug: 135597368
Test: m java
Change-Id: I0cb213599d6612746d988b8966cbd529b5328db0
--legacy will soon no longer be passed by default to all aapt2
compiles. Allow it to be specified in LOCAL_AAPT_FLAGS by passing
it to aapt2 compile when it is present and filtering it out from
the flags passed to aapt2 link.
Bug: 135597368
Test: m java
Change-Id: I92792cf6a0d4c6ecf5e0971523bd0ab76c81345f
This change creates following build artifacts that are currently part of
device-tests.zip and general-tests.zip. The smaller build artifacts are
used to reduce the download size required to run TradeFed suite.
Detailed design can be found in the bug.
From device-tests
device-tests_configs: include all test config files in device-tests, zip
file is less than 1MB.
From general-tests
general-tests_configs: include all test config files in general-tests,
zip file is less than 1MB.
general-tests_host-shared-libs: include tools and shared libraries
required to run host side test, zip file is about 60MB
Bug: 73786521
Test: make device-tests and general-tests, verify output.
Change-Id: I34c9aa3c1c672d5d58eab6de92198a7b8e4a681c
Instead of just depending on the single image file, depend on the entire
image that gets loaded -- the .oat / .vdex files, and the modules that
are part of the image that have their own files.
This is necessary for RBE, where the rule only gets the files that it
depends upon.
Test: treehugger
Test: build a system image with RBE
Change-Id: I93a580b42cf4ef1824ee1397e551c065f083348a
Sanitizer coverage is currently broken with the experimental pass
manager. See b/133876586 for more information. The patch is currently
being worked on upstream (https://reviews.llvm.org/D62888), but is not
ready yet. Hence, we disable it here (similar to the LTO bug).
Bug: 133876586
Test: Build anything with SANITIZE_TARGET='fuzzer', verify that it has
'sancov' symbols.
Change-Id: I74d02e52ccbe2a3d96b6b8e30230197b554e60a0
Previously, setting PRODUCT_BUILD_SUPER_PARTITION to false for a partial
build (with PRODUCT_USE_DYNAMIC_PARTITIONS == true) would fail to
include necessary keys in misc_info.txt that are required when merging
two partial builds to create a dynamic-partition-enabled mixed build.
This change ensures these necessary keys are included even when
PRODUCT_BUILD_SUPER_PARTITION is false. Setting
PRODUCT_BUILD_SUPER_PARTITION to false causes partial builds to skip
building super.img and super_empty.img, instead relying on these images
to come from the final merged build.
Bug: 134764140
Test: Building & booting a dynamic-partition-enabled mixed build, and
inspecting partial builds' logs / out folder to ensure that
super.img/super_empty.img were not created.
Change-Id: I99431a9a342e9b0617510e250597f3024ef39322
BOARD_SUPER_PARTITION_ERROR_LIMIT can be set by OEMs to cause a
build failure when the sum of sizes of logical partitions exceeds the same.
It is set to BOARD_SUPER_PARTITION_SIZE by default.
Bug: 133329143
Test: mmm -j32
Change-Id: Ief85c9ab3e3b9d071cd22b70e13b5c64bb784b9c
Bug: 134509111
Test: add "require_root: true" to init_benchmarks and libpower_test
build the modules, confirm the extra target preparer is added in the
test config.
Change-Id: I2fdae79d45fd1e5866ee94d1f0e59df106be2a87
Current information is not enough if the prebuilt modules are depend on
AAR libs Therefore, AIDEGen has to collect the classes.jar of the
prebuilt modules from build system.
Build module-info.json without this change:
Build time: 1m55.001s
File size: 14,918,354 Bytes
Build module-info.json with this change:
Build time: 1m56.292s
File size: 15,577,031 Bytes
Bug: 132768299
Test: 1. Checkout the internal master branch
2. Patch this CL
3. m -j out/target/product/generic_x86_64/module-info.json
4. Open the module-info.json
5. For verifying soong_java_prebuilt.mk, check the classes.jar of
module prebuilt-google-play-* exists.
e.g.
"prebuilt-google-play-...": {
...
"classes_jar": [
"out/target/common/obj/JAVA_LIBRARIES/
prebuilt-google-..._intermediates/classes.jar"
]
}
5. For verifying java_prebuilt_internal.mk, check the classes.jar
of module ink exists.
e.g.
"ink": {
...
"classes_jar": [
"out/target/common/obj/JAVA_LIBRARIES/ink_intermediates/
classes.jar"
]
}
Change-Id: I09518c92260db47d2686493fa13951f316159d13
* changes:
Fix dependency on BOARD_AVB_SYSTEM_KEY_PATH
Fix some java library dependencies
Depend on NDK libraries
Call clean-path in more places
Add missing dependecy on SOONG_ZIP
Add dependencies on the toolchain (clang, etc)
When an Android.mk specifies a local path that is outside the current
directory, it uses '..', since we prepend $(LOCAL_PATH)/ to the given
path.
This path ('a/b/../c') gets inserted into command lines and
dependencies. For dependencies, when it gets to Ninja, Ninja calls
CanonicalizePath and removes those references ('a/c'), but the command
line is preserved.
So we've got a command line that references 'a/b', but no dependency on
it. Usually that's not a big problem, but it's an issue if we're trying
to only expose dependencies to the rule, like with RBE only sending the
dependencies to the remote workers. So use our 'clean-path' macro to
collapse the '..' references in Kati so that they don't show up in the
command line either.
Test: treehugger
Test: build a system image with RBE
Change-Id: I0706faa2ac15e9c12c720f43c7bb8171c5efd97c
