In FinalizeMetadata and PropertyFiles, we need to reserve space between
the calls to Compute() and Finalize(). We used to put a 10-byte
placeholder, in the hope of covering the 'offset:length' space for the
metadata entry, as well as the possible value changes in other entries.
However, this could fail in two possible cases: (a) metadata entry
itself has a large offset (e.g. staying near the end of a 1-GiB package,
where the offset itself has 10-digit); or (b) the offsets for other
entries change substantially due to entry reordering. Note that for case
(b), it's space inefficient to always reserve 15-byte for _each_ token
in the property-files.
This CL handles both of these two cases. For (a), we bump up the 10-byte
to 15-byte, which is large enough to cover a package size up to 10-digit
number (i.e. ~9GiB) with a metadata entry size of 4-digit. All these
15-byte will be used for the metadata token alone.
For (b), we add a fallback flow that would retry one more time, but
based on the already signed package that has entries in desired order.
Bug: 74210298
Test: python -m unittest test_ota_from_target_files
Test: Generate aosp-bullhead full OTA with '--no_signing' flag.
Change-Id: If20487602d2ad09b3797465c01972f2fa792a1f1
(cherry picked from commit 3bf8c65029)
This CL exposes ota-property-files flag for non-A/B OTA packages.
Currently the line only contains the info for the METADATA entry, for
example "ota-property-files=metadata:69:286". This allows system updater
to just download the METADATA entry, as opposed to downloading the
entire package, to learn about the info regarding the OTA package (e.g.
post-OTA build fingerprint). Note that this requires the OTA server-side
support to pass down the flag along with the update URL.
Bug: 74210298
Test: python -m unittest test_ota_from_target_files
Test: Generate a non-A/B package and check the property-files string.
Change-Id: I1482c587e18ea7101c8328777ea988c2d8ca06ac
Merged-In: I1482c587e18ea7101c8328777ea988c2d8ca06ac
(cherry picked from commit c0746f4e94)
AbOtaPropertyFiles writes 'ota-property-files' into package metadata.
Comparing to StreamingPropertyFiles, AbOtaPropertyFiles additionally
writes a token of 'payload-metadata.bin' for a virtual entry that's head
of the 'payload.bin'. This entry can be used by the system updater to
verify if a payload is applicable to the underlying device.
AbOtaPropertyFiles intends to replace StreamingPropertyFiles, as it
covers all the info of the latter. We keep them both in P, and will
remove the latter in later release.
Bug: 74210298
Test: python -m unittest test_ota_from_target_files
Test: Generate full and incremental A/B OTAs. Check the property-files
in the METADATA entry.
Change-Id: If5872c8ee0a97a8a95b07d4c69b463aa3fe1b9b9
(cherry picked from commit b63046750c)
And move StreamingPropertyFiles as its subclass. We will need similar
PropertyFiles instance for non-A/B OTA as well (to expose the
offset/size for the METADATA entry).
Bug: 74210298
Test: python -m unittest test_ota_from_target_files
Test: Generate an A/B OTA. Check the generated property-files string.
Test: pylint --rcfile=pylintrc \
ota_from_target_files.py \
test_ota_from_target_files.py
Change-Id: If90d97f0b330749fd8a6cde2ed9d0d6cd6ea60a8
(cherry picked from commit 432f374a1701909ca324f8b047666614684568c0)
This CL breaks down ComputeStreamingMetadata() into mutiple member
functions of StreamingPropertyFiles class, which correspond to the
two-pass logic when generating streaming property files (aka streaming
metadata).
StreamingPropertyFiles.Compute() does the work for the first pass, by
putting placeholders before doing initial signing. Finalize()
corresponds to the second pass, where the placeholders get replaced with
actual data. Verify() can be optionally called to assert the correctness
of the work.
The separation between Compute() and Finalize() is to allow having
multiple StreamingPropertyFiles instances (in coming up CLs). This way
we can call Compute() multiple times for each instance, followed by only
one call to SignOutput(). And similarly for Finalize().
Bug: 74210298
Test: Generate an A/B OTA package. Check the METADATA entry.
Test: python -m unittest test_ota_from_target_files
Change-Id: I45be0372a4863c4405e6d8e20bcb9ccdc29e7e11
(cherry picked from commit ae5e4c30fe)
And add unittests for ComputeStreamingMetadata().
This prepares for the changes that add additional property-files (for
both of A/B and non-A/B).
Bug: 74210298
Bug: 72751683
Test: python -m unittest test_ota_from_target_files
Test: Generate A/B OTA package. Check the ota-streaming-property-files
in the METADATA entry.
Change-Id: Ib4b069f61c2c06c035c0cff73a55112f3936b969
(cherry picked from commit f5110498c0)
This CL adds a new flag '--skip_postinstall' that allows skipping all
the postinstall hooks when generating an A/B OTA package (default:
False). Note that this discards ALL the hooks, including non-optional
ones. Should only be used if caller knows it's safe to do so (e.g. all
the postinstall work is to dexopt apps and a data wipe will happen
immediately after).
Bug: 73547992
Test: python -m unittest test_ota_from_target_files
Test: Generate a full OTA package for walleye. Examine the generated
payload.
Change-Id: Ifc069e897b4019605051eabfd221230a6a37867c
The secondary payload should always be applied with
SWITCH_SLOT_ON_REBOOT=0. This CL moves the 'secondary' parameter from
Payload.WriteToZip() to Payload.__init__(). So it can append the flag to
secondary/payload_properties.txt.
Bug: 35724498
Test: Generate an A/B OTA with --include_secondary. Check
secondary/payload_properties.txt entry in the generated ZIP.
Test: `python -m unittest test_ota_from_target_files`
Change-Id: I816c07ab57a1c8a52eff785801634b8b1cb134d4
By default, an A/B OTA package doesn't contain the images for the
secondary slot (e.g. system_other.img). Specifying
"--include_secondary" that's introduced in this CL allows generating
a separate payload that will install secondary slot images. Both
payloads will be added to the generated A/B OTA package.
An example A/B OTA package with secondary payload
|
+-- payload.bin
|
+-- payload_properties.txt
|
+-- secondary/payload.bin
|
+-- secondary/payload_properties.txt
|
+-- ...
Such a package needs to be applied in a two-stage manner. During the
first stage, the updater applies the primary payload only. Upon
finishing, it reboots the device into the newly updated slot. It then
continues to install the secondary payload to the inactive slot, but
without switching the active slot at the end (needs the matching support
in update_engine, i.e. SWITCH_SLOT_ON_REBOOT flag).
Due to the special install procedure, the secondary payload will be
always generated as a full payload.
Bug: 35724498
Test: Generate full and incremental OTAs with --include_secondary. Check
the generated OTAs.
Test: python -m unittest test_ota_from_target_files
Change-Id: I975e826bec492e86eb400f99de0c355a32420127
When calling 'openssl x509 -pubkey' to extract the public key from a
certificate, openssl 1.0 and 1.1 handle the '-out' parameter
differently. openssl 1.0 doesn't write the output into the specified
filename, which leads to the payload verification failure in
check_ota_package_signature.VerifyAbOtaPayload(). This CL addresses
the issue by always collecting the output from stdout instead.
It also refactors the two copies into common.ExtractPublicKey(), and
adds unittest. get_testdata_dir() is moved into test_utils.py that holds
common utils for running the unittests.
Bug: 72884343
Test: python -m unittest test_common
Test: python -m unittest test_ota_from_target_files
Test: Run sign_target_files_apks with '--replace_ota_keys' on marlin
target_files zip. Check the payload pubkey replacement.
Test: Trigger the tests with forrest, and tests no longer fail on
machines with openssl 1.0.1.
Change-Id: Ib0389b360f064053e9aa7cc0546d718e7b23003b
This breaks down the current WriteABOTAPackageWithBrilloScript() into
smaller and testable units, which also prepares for the work in
b/35724498.
Bug: 35724498
Test: python -m unittest test_ota_from_target_files
Test: Get identical A/B OTA packages w/ and w/o the CL.
Change-Id: I2ea45ce98e2d2baa58e94fb829b7242f6fe685a7
Merged-In: I2ea45ce98e2d2baa58e94fb829b7242f6fe685a7
(cherry picked from commit 036d721812)
The info comes from the build.prop file of the target build (thus no
backward compatibility concerns). OTA server and client can optionally
use these info to understand the expected behavior of an OTA package.
Bug: 72751683
Test: python -m unittest test_ota_from_target_files
Test: `m dist`, then check the metadata in the generated OTA package.
Change-Id: I5935f67684d2486bb5f00d67ce4bc756589a56ed
Create a wrapper class that handles the payload signing, which unifies
the paths with and without external signer. Also add tests for the newly
added class.
The test keys under testdata/ are created with the script in
development/tools/make_key. testdata/testkey_with_passwd.pk8 uses
password "foo".
Test: python -m unittest test_ota_from_target_files
Test: Get identical A/B OTA packages w/ and w/o the CL.
Change-Id: Ic770aec726498a3babb88ec509985e7f1210fb18
Now they (A/B, non-A/B full and non-A/B incremental) share the same
code. Also add tests for the newly added function.
Test: python -m unittest test_ota_from_target_files
Test: Build A/B and non-A/B packages respectively.
Change-Id: I5499dd9c683ac1a18d8a24f21ff8845fe69f343e
Prior to this CL, we have similar codes in different paths
(WriteFullOTAPackage / WriteBlockIncrementalOTAPackage /
WriteABOTAPackageWithBrilloScript). This CL factors out the common codes
that deal with OEM-specific properties into BuildInfo class, and adds
tests for the new class.
Test: python -m unittest test_ota_from_target_files
Test: Create an incremental package that uses and doesn't use OEM
properties respectively.
Test: Create a full package that uses and doesn't use OEM properties
respectively.
Change-Id: Ida914cace12803d55396fa503bafcac2db2a520e
