This is configured from Make by setting up Darwin+Arm64 as a HOST_CROSS
target (which is largely true, as binaries can't be executed on X86_64
machines). On the Soong side, it's a bit blurier, as we don't current
have any other users that are the same OS but not natively executable
(Linux/musl is executable, Windows/x86 is a different OS).
Instead of requiring cc_binary/etc to become multi-architecture-aware
and using something like common_first/MultiTarget, this defaults all
non-multi-architecture-aware modules to be built with both
architectures. It then adds a dependency with the
DarwinUniversalVariantTag so that supporting modules can get the outputs
of the other variant.
Cc uses that dependency tag to run lipo on shared libraries and binaries
so that the output of the x86_64 variant is actually a fat binary
including both architectures.
Bug: 203607969
Test: build sdk-repo targets on a Mac
Change-Id: Icbddb0a177c0ba19d3e0d11f8cf568e0d1ea3245
Without these errors, the last encountered deapexer would silently be
used. However with PRODUCT_INSTALL_APEXES there will only be deapexer
for installable APEXes, and we can assume only a single installable
APEX exists for each APEX variant, so make it an error if it isn't the
case.
Corresponding to http://ag/15156931.
Test: m nothing SOONG_CONFIG_art_module_source_build=true
Test: m nothing SOONG_CONFIG_art_module_source_build=false
Test: m nothing SOONG_CONFIG_art_module_source_build=false
with installable:true for the com.android.art.debug prebuilt APEX -
check that it fails with an "ambiguous duplicate deapexer" error
Bug: 192006406
Bug: 192542393
Change-Id: I44566fd26b12f82a8a67fe4a69e56303460756d0
This is to help following refactor for individual modules to have their
own version of checking where needed.
For example, apk in apex may want to enforce it's own version of
CheckMinSdkVersion.
Bug: 205923322
Test: presubmit
Change-Id: Ia2fad6c52af39e21f65385bcb283f1e3adab5548
The new property is used to mimic some of the build behaviors that
currently are applied only when an APEX is `updatable: true`. This
property is helpful to minimize the sudden impact (e.g. change in size)
when an APEX becomes updatable.
Currently, the behavior that this property mimics is the disabling of
the size optimization.
Bug: 207336449
Test: m
Change-Id: I500306afa1221625fda3e89a8d12d5d341791a1f
We will need the profile when we generate the primary boot image on
device.
Bug: 203492478
Test: Run `banchan com.android.art x86_64 && m` and see
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof`.
Test: Run `lunch aosp_cf_x86_64_phone-userdebug && m` and see both
`$ANDROID_PRODUCT_OUT/apex/com.android.art/etc/boot-image.prof` and
`$ANDROID_PRODUCT_OUT/system/etc/boot-image.prof`, in different
sizes.
Test: Start Cuttlefish with the built image and see both
`/apex/com.android.art/etc/boot-image.prof` and
`/system/etc/boot-image.prof` on device.
Change-Id: Id879dc49b234133dfbb9563814328661a1f4a6c0
Vendor APEXes do not formally support updates outside of the main OTA
process. We should clarify this at build time.
Test: set vendor apex to updatable, observe failure
Test: apex_test.go
Change-Id: Ife8d242a42415ebf00d7dced72c07cda1fde1839
Previously, could not set an empty string as a value of an attribute;
however, this is necessary in some cases. To not unnecessarily create an
empty string, use string pointers for attributes rather than strings.
Test: go test bp2build tests
Change-Id: I03b3a3567452d455246d22d81f86c317d06b7c39
This CL updates platform_systemserverclasspath,
systemserverclasspath_fragment, and
prebuilt_systemserverclasspath_fragment to write entries for
STANDALONE_SYSTEMSERVER_JARS to systemserverclasspath.pb. A new property
`standalone_contents` is aded to `systemserverclasspath_fragment` and
`prebuilt_systemserverclasspath_fragment` to list the standalone system
server jars in the APEX, and entries will be written to
systemserverclasspath.pb accordingly at build time.
To add more context, these entries will be consumed by derive_classpath
in order to generate an environment variable
PRODUCT_STANDALONE_SYSTEM_SERVER_JARS. The environment variable will
then be comsumed by odrefresh to determine what jars to preopt on early
boot.
Note that the variable should not end with "CLASSPATH" because the list
is not used by runtime as a classpath. It is just a colon-separated list
of jars. System server loads the jars separately with paths hardcoded in
the code.
Bug: 203198541
Test: manual -
1. Add some jars to PRODUCT_STANDALONE_SYSTEM_SERVER_JARS
2. Add some other jars to PRODUCT_APEX_STANDALONE_SYSTEM_SERVER_JARS
and standalone_contents.
3. Build an image.
4. Flash the image to a device.
5. adb shell echo \$STANDALONE_SYSTEMSERVER_JARS
6. See the correct list of jars.
Change-Id: I09a6fd1d3db85c194330da9b751702a9bf069e26
The sh_binary module is not supported the vendor variant. So, even if
there is "vendor: true" in sh_binary module, the image variant is
"image:" instead of "image:vendor.Tiramisu".
But the vendor APEX has vendor variant, so vendor APEX module and
sh_binary module have different variants and the sh_binary cannot be
added to vendor apex.
So the Sh_binaries property is added, and the image variant is removed
at DepsMutator.
Bug: 205065320
Test: make -j40 && sh_binary is added to vendor APEX && install check
Change-Id: I30e2d96a73b45e7b06eff24550542cb010008c41
Perform consistency checks as per http://go/updatable-shared-libraries
These include:
* no attribute can specified can be less than T
* max-device-sdk can't be less than min-device-sdk
* min and max-device-sdk need to be at least the module's
min_sdk_version
* using on-bootclasspath-before implies that the module's
min_sdk_version is at least T or the library has min-device-sdk of at
least T
Test: m nothing
Bug: 191978330
Change-Id: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
Merged-In: Iaca5cf23fb0bc7e65effb3529c8e829560894c2e
(cherry picked from commit f9e584dd20)
We are expanding PackageManager's supported attributes and this change
enables the developer to define them in the .bp file.
Test: m nothing
Bug: 191978330
Change-Id: I01d579190fb585662086a7fc456f3b33cb89fb57
Merged-In: I01d579190fb585662086a7fc456f3b33cb89fb57
(cherry picked from commit 826863c8e0)
As libsync is NDK/LLNDK, it doesn't need to be aded to allowlist as
apex_available.
Bug: n/a
Test: m
Change-Id: I16cfb258a24bde4def428f1e6277f5d3c95c228c
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
This relands If65d283abc86f18ad266da0bf16fe95971a0bf9c with fixes
to install files into $OUT/apex and I606286e971b55d9d1fc4dcd0fbd476962de5fa79
with a fix for reversed logic.
Bug: 204136549
Test: m checkbuild
Change-Id: Ie65c53ebc7911efacdb8e11ba49059448f03c658
Move apex module installation rules into Soong by overriding
InstallBypassMake.
Soong installs don't support post install commands, so move the
symlinks into separate rules and add dependencies on them.
This relands If65d283abc86f18ad266da0bf16fe95971a0bf9c with fixes
to install files into $OUT/apex.
Bug: 204136549
Test: m checkbuild
Change-Id: I606286e971b55d9d1fc4dcd0fbd476962de5fa79
Extract and install the primary apk normally, and then unzip the rest
of them as a post install command.
Bug: 204136549
Test: app_set_test.go
Change-Id: I17437ff27f49df6bc91bdbbea6173b46c7d3ec4e
This is needed to allow the Android Go versions of modules
(com.google.android.go.*) to select a different compression toggle than
their non-Go (com.google.android.*) conterparts. go/go-updatability
Bug: 203024418
Test: Preloaded go variants on wembley, booted Android.
Change-Id: Ic96aff5fafb65fbd08e8a69d47c994532e27819e
Revert submission 1869814-vapex-multi-config
Bug: 206551398
Reason for revert: DroidMonitor-triggered revert due to breakage https://android-build.googleplex.com/builds/tests/view?invocationId=I55600009996329947&testResultId=TR93527797572038984, bug b/206551398
Reverted Changes:
I0cd9d748d:Adds multi_install_skip_symbol_files field (defaul...
I5912a18e3:Demonstrate multi-installed APEXes.
I0e6881e3a:Load persist props before starting apexd.
I932442ade:Adds a new prop context for choosing between multi...
I754ecc3f7:Allow users to choose between multi-installed vend...
Change-Id: If09bf590e3ad93e14fbf89299f80d497c9604a78
