Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: I3df60f0b53ba02ec2c55a80c7da058eac5909d26
* changes:
Revert "Detect invalid arch specific properties in snapshot"
Revert "Adds support for 'ignored-on-host'"
Revert "Fix snapshot of a host/device cc_library with stubs"
Revert submission 1302576
Bug: 156054601
Reason for revert: Presumed root cause of build break.
Reverted Changes:
Ifc8116e11:Detect invalid arch specific properties in snapsho...
I7ebd33307:Adds support for 'ignored-on-host'
I167b47a13:Fix snapshot of a host/device cc_library with stub...
Change-Id: Id7eba0bdde5c579e10e9b42d94a7cfab5f34995f
Adds api scope for the module_lib and adds that to the list of all
all available scopes. The scope is generated if and only if the
api_surfaces property contains "module_lib".
No other changes are needed as the generation of the APIs is completely
driven by the allApiScopes array and the information in its contained
apiScope structures.
Test: m checkapi
Bug: 155164730
Change-Id: I7769af6823badca8715a270f86cf53b4e954b7df
Adds a per scope set of properties that allows explicit control over
the API surfaces generated.
Previously, the term active was used to determine whether it was
generated but that was a little abstract and unclear so has been
replaced by generated.
Test: m nothing
Bug: 155164730
Change-Id: I7539d89618b61f6b9d1a4b60cc3f9614b157f0d9
android_test_import modules should be labelled as tests so they are
not dexpreopted.
Bug: 155778135
Test: m CtsCorruptApkTests_Compressed_Q
Change-Id: I7baa5405d03df03920b01616b030ba77f882a77e
NetworkStackTests is using platform APIs for its Java code, but needs
to use portable JNI libraries. Add a jni_uses_sdk_apis so that it
can select the SDK variants of JNI libraries even though it doesn't
set sdk_version.
(clean cherry-pick from internal branch)
Bug: 154665579
Test: atest NetworkStackTests
Merged-In: I841fb761ec1c1ab8596aac44e01eb7eb91428006
Change-Id: I841fb761ec1c1ab8596aac44e01eb7eb91428006
Previously, the snapshot code did not know whether a specific property
could be arch specific or not and assumed that they all were which
meant that it could generate snapshots containing arch specific values
for properties that are not arch specific and so would fail when
unpacked.
This change requires arch specific fields in SdkMemberProperties to be
tagged as such using `android:"arch_variant"` (just as in module input
property structures). Any property without that must have properties
that are common across all variants.
Bug: 155628860
Test: m nothing
Change-Id: Ifc8116e11d987cfe7aec2eeaa964f3bbf36b5dc2
Previously, java_sdk_library used AddLoadHook() to register a hook that
when called would create its child modules. That meant the
java_sdk_library properties that were used to create the child modules,
e.g. sdk_version could not be defaulted because the modules are created
before the defaults are applied.
This change switches java_sdk_library to use the new
SetDefaultableHook() mechanism to register the hook instead of the
AddLoadHook() mechanism.
It also prevents the child modules from being created if the module has
been disabled.
Bug: 155295806
Test: m checkapi
Change-Id: Ic6f90eb4449338e549878f64e8119e286b9aa549
This CL merges the biggest three metalava invocations --
stub and signature file generation, api lint, and "check released" --
into one call.
For each of the existing separate rules for api lint and check released this change:
1) Stopped creating a separate rule containing its own metalava invocation.
2) Moved the code for creating the rule earlier so it can add extra flags to the combined metalava command.
3) Moved the message handling into metalava, allowing the message to be passed in.
4) Added a flag to record whether the specific check was needed so that you can separate the timestamp file creation out to run after the merged metalava command.
A couple of minor bug fixes and clarifications.
Bug: 151160048
Test: "m" and treehugger
Test: Apply https://android-review.googlesource.com/c/platform/frameworks/base/+/1295541 and run `NINJA_ARGS="-k 999" m checkapi`
-> Make sure there are 4 kinds of lint failures ("AddedFinal" and "VisiblySynchronized") with the valid error messages, from:
- api-stubs-docs
- system-api-stubs-docs
- test-api-stubs-docs
- module-lib-api-
Test: Run the 4 cp commands shown by lint
-> Make sure the following 4 baseline files are updated:
frameworks/base/api/lint-baseline.txt
frameworks/base/api/module-lib-lint-baseline.txt
frameworks/base/api/system-lint-baseline.txt
frameworks/base/api/test-lint-baseline.txt
Test: Then run `NINJA_ARGS="-k 999" m checkapi` again.
-> Make sure the API lint errors are gone
-> Make sure "api-stubs-docs" shows the "You have tried to change the API from what has been
previously released in ..." error. (because of "AddedFinal")
-> Make sure it the other 3 API surfaces show the "You have tried to change the API from
what has been previously approved" error.
Test: Remove "final" from Intent.java and run "NINJA_ARGS="-k 999" m checkapi" again.
-> This time, all the 4 API surfaces say "You have tried to change the API from
what has been previously approved" error."
Test: Run the 4 "make *-update-current-api" commands shown in the above errors and "NINJA_ARGS="-k 999" m checkapi"
-> The exact command is:
$ make \
module-lib-api-update-current-api \
api-stubs-docs-update-current-api \
test-api-stubs-docs-update-current-api \
system-api-stubs-docs-update-current-api
-> Make sure frameworks/base/api/*-current.txt are properly updated.
Test: Run "m update-api"
-> Make sure no text signature files get updated.
Test: Run "m droid".
-> Make sure everything builds fine.
Change-Id: Ia1a5510b57d58748b4655473d4585636deb7f45e
Merged-In: Ia1a5510b57d58748b4655473d4585636deb7f45e
This adds gcov coverage support for Rust device library and binary
modules (including test modules). Support is provided to pass Rust
static library gcno files to CC modules and visa versa.
Additional changes:
* Begin mutator added for Rust modules.
* SuffixInList added to android package.
* CoverageEnabled added to Coverage interface.
* CoverageFiles added to LinkableLibrary interface.
* Fix in coverage mutator for non-CC modules which marked the wrong
variant as the coverage variant.
* Added coverage libraries to the cc.GatherRequiredDepsForTest.
Bug: 146448203
Test: NATIVE_COVERAGE=true COVERAGE_PATHS='*' m -j <rust_module>
Change-Id: If20728bdde42a1dd544a35a40f0d981b80a5835f
@TestApi does not have stability requirements, so we shouldn't be
checking its compatibility with the last released version.
This CL removes the expectation that a test-removed.txt is checked in
for each module during finalization.
Bug: 155197156
Test: m (with SDK 30 imported)
Change-Id: Ib3f671493f1d230116bec51b884e8072643b10d4
Merged-In: Ib3f671493f1d230116bec51b884e8072643b10d4
(cherry picked from commit 6bf8e415a50826a378cc58aba87854f52c9f1d32)
This makes prebuilt_sdk look for and create modules in the module-lib
and system-server subdirs too, e.g.:
framework-wifi.api.module-lib.latest
Bug: 149293194
Test: follow-up change
Change-Id: Idbded6b633315034e669e9c5dd2bd30725d5c76b
Merged-In: Idbded6b633315034e669e9c5dd2bd30725d5c76b
This is a follow-up for https://r.android.com/1292915, which introduced
two-column format for the components of the boot jar list. This CL
fixes build failure for the coverage build.
Test: m EMMA_INSTRUMENT=true EMMA_INSTRUMENT_FRAMEWORK=true
Change-Id: Ib8b156bf81943fe07084cbce5e7e9bf70e759a5d
Soong was referencing the baseline file regardless of whether it was
valid or not.
Also update the lint message to match the one metalava itself prints,
which only suggests whitelisting the error if it's not possible to fix
it properly.
Bug: 154616909
Test: m (with lint error)
Change-Id: I4c6ec327a59aefe74825b4c4719393dd267ba3aa
Merged-In: I4c6ec327a59aefe74825b4c4719393dd267ba3aa
(cherry picked from commit 34ced82d2a)
This makes it consistent with android_app. Also, most android_app_import
modules with JNI libs target a single arch.
Test: TreeHugger
Bug: 154281342
Change-Id: I5bbb2d2b733bbd6b868898285683ba5ff45be10b
This reverts commit 17d69e3484.
Reason for revert: This new field is not useful without dependencies in aosp
Test: builds
Change-Id: I87bd820cd6dbc5274ce3d28c4578381718aa805d
Merged-In: I70d6f7dc751510311b03e245b2189a76b395a49c
The first component is the apex name, or a special name "platform"
if the boot jar is a platform jar rather than a part of some apex.
This is a prerequisite change for moving core-icu4j to a separate
com.android.i18n apex.
Old one-column format is still supported, but all unqualified
components of PRODUCT_BOOT_JARS get "platform:" prepended to them
after reading the product makefiles.
Test: aosp_walleye-userdebug boots
Bug: 138994281
Change-Id: Ic229159fdcdaf6182210a53b63850a389dd786fc
The stubs source should be generated using the same classpath that is
used to compile the implementation library, i.e. sdk_version,
system_modules and libs/static_libs.
Previously, the sdk_version used to generate the stubs was different.
It provided access to a wider API surface than was necessary. This
change fixes that.
Test: m checkapi
Bug: 155164730
Change-Id: I7bc54dc4ad12a7d6c7503111d1322ee35c56d713
runtime_resource_overlay is put to an APEX via 'apps' property. It is
placed under ./overlay directory in it.
Bug: 154822536
Test: m
Change-Id: I8edf4a26c26368c52fb7b327b2ecc829f21ea148
