When TOP dir changes and we reuse the same output between the old and new checkouts, we need to rewrite all the symlinks used by Bazel and other tools in the out-directory to point to the new top directory. Otherwise, if the old source dir is deleted, the build will fail.
I used the OUT_DIR/soong/soong.environment.available file to find out the previous PWD.
Tested:
1. Create source dir 1, run build, create source dir 2, remote source dir 1, reuse out dir and rerun build => build succeeded with this change.
2. m libc after moving build TOP. Only the analysis phase was rerun, the actual build was not rerun.
Bug: b/300498226
Change-Id: I196625baa1f4efe7a4734accfa1f0be7c98a7920
build_number.txt was generated in runKati, and runKati is run multiple
times throughout the build. If a build number is not set, then one will
be generated using the current timestamp, meaning that multiple
different build numbers will be used in different phases of the build.
Instead, generate build_number.txt during SetupOutDir(), so that we
only have 1 build number.
This is a resubmission with a change to ensure out/soong is created
before writing the build number file.
Bug: 297269187
Test: edit a bzl file to force bazel to rerun, change the code so that use_fixed_timestamp=true during partition builds, m installclean, m bazel_sandwich, and observe that the bazel/make partitions are byte-for-byte identical
Change-Id: I47abcca166c701bb66a6a7731aecad5818279244
build_number.txt was generated in runKati, and runKati is run multiple
times throughout the build. If a build number is not set, then one will
be generated using the current timestamp, meaning that multiple
different build numbers will be used in different phases of the build.
Instead, generate build_number.txt during SetupOutDir(), so that we
only have 1 build number.
Bug: 297269187
Test: edit a bzl file to force bazel to rerun, change the code so that use_fixed_timestamp=true during partition builds, m installclean, m bazel_sandwich, and observe that the bazel/make partitions are byte-for-byte identical
Change-Id: I5bf3bb6c78e7529749ca9275f67db3f2f9e66af2
To maintain good backwards compatibility with the legacy partition
building behavior, allow actions to read
BUILD_BROKEN_INCORRECT_PARTITION_IMAGES so that we don't have to rerun
analysis.
Bug: 205632228
Test: Presubmits
Change-Id: I2b55c0143cbdaf010e6b5fd0c3d51d6930a94eff
To maintain good backwards compatibility with the legacy partition
building behavior, allow actions to read
BUILD_BROKEN_INCORRECT_PARTITION_IMAGES so that we don't have to rerun
analysis.
Bug: 205632228
Test: Presubmits
Change-Id: I8b25a62f24bc6d628fb055239b084f6ea535e38b
This feature is obsolete.
This makes a large number of codepaths "dead code" (such as
module-specific implementations of ApiBp2build functionality). These
will be deleted in a followup CL.
Bug: 284029211
Test: Presubmits
Change-Id: Ib53b99f1fe8c24380d219caf44e9bb3b96724fa0
Starting from Android V, vendor seapp_contexts files can't assign
coredomain to vendor apps, as it's Treble violation. This build broken
variable is to suppress the enforcement for devices launching with U or
prior.
Bug: 280547417
Test: set BUILD_BROKEN_VENDOR_SEAPP_USES_COREDOMAIN := true and build
Change-Id: Ic4b5309f0d9bab9b93e88988d1a5a942b2de220a
glob pattern could vary, depending on device configuration, but it uses
the same glob output path for now. It makes unnecessary soong
reevaluation due to the previous result is always overwritten whenever
the target is changed.
So make it product specific to avoid this.
And also let bootstrap.ninja use 'new' ninja file for globbing
Bug: 294378814
Bug: 294058160
Test: lunch a && m nothing && lunch b && m nothing && lunch a && m
nothing and then check if there is no glob work. (a and b has different
glob pattern due to RRO configuration or something)
Test: check if bootstreap.ninja include 'new' ninja file for globbing
Test: declare `cc_library { ... srcs: ["*.c"] }` && \
touch a.c && m nothing && touch b.c && m nothing && \
rm b.c && m nothing && mv a.c c.c && m nothing
and then check if m includes 'regenerate glob..' log.
Change-Id: I9337ae3b33cc2c0689f9731bbae5caae67612e3e
This reverts commit d93c67f64c.
Reason for revert: USE_RBE has again been made the default now, so we should no longer need this code.
Change-Id: I4163c61eed90163e763c29e07dd6edfc9c41b9b9
glob pattern could vary, depending on device configuration, but it uses
the same glob output path for now. It makes unnecessary soong
reevaluation due to the previous result is always overwritten whenever
the target is changed.
So make it product specific to avoid this.
Bug: 294058160
Test: lunch a && m nothing && lunch b && m nothing && lunch a && m
nothing and then check if there is no glob work. (a and b has different
glob pattern due to RRO configuration or something)
Change-Id: I7b6b7a326de681b046a55dbdb34d812cace510e6
Some versions of Fedora include patches to unzip to enable zipbomb
detection that incorrectly handle zip64 and data descriptors and fail
on large zip files produced by soong_zip. Disable zipbomb detection
inside the build.
Reported upstream in https://bugzilla.redhat.com/show_bug.cgi?id=2227130.
Bug: 286885495
Test: builds
Change-Id: I8e4438720bbb17a073ff3b5535f01c2827485838
Enabling the RBE variable can cause issues around pool parallelism when
we set the env variable, but don' run the build with RBE due to auth issues.
So, I am explicitly unsetting the variables in those cases.
Bug: b/292224253
Tested: https://b.corp.google.com/issues/292224253#comment26
Change-Id: I19718b4ee6c058ba1b11d3df260421bbf8c9567e
even with USE_RBE=true.
These are alternate modes of soong_build that don't use rbe/reclient.
This lets us to remove USE_RBE=false from the bp2build run.
Test: presubmits
Change-Id: I439f9cf7e92ec85ca56baec5f62a83ee49b510d4
When there's no stubby and we are asked to use google prod creds, that's invalid configuration, so don't use RBE
Bug: b/283828386
Change-Id: I1564b4f70e46fb90c87a0432c46616caa1614aac
reproxy only requires LOAS credentials for authentication. Append the
-nocheck_ssh option to gcertstatus so we don't check ssh credentials.
Test: RBE successfully started after running gcertdestroy --nodestroy_loas2
Bug: b/287297140
Change-Id: I413931b10d8e8d9ae2f8acd7ebfe37d8b3bba455
This is for integration with BES for bazel test metrics.
Bug: 287102416
Test: b build libcore:all --invocation_id=`uuidgen`
Test: build/bazel/scripts/analyze_build (to verify it's set)
Change-Id: I541b2d65bfa85718fc916582e0540384ae3810d9
From the previous work on renaming build.ninja, it was found that there
are extra dependencies from build.ninja which can be varied by
TARGET_PRODUCT : which is soong.environment.used.<tag>. This change
renames soong.environment.used to have target product between 'used' and
'<tag>' if available.
Bug: 277029044
Test: Test confirmed that build.ninja is not being re-generated
Change-Id: I987b6bd1a8b4f06dac52537e4178d8556251d254
Test: Tested by following steps
1.m nothing: field is empty
2.USE_RBE=false m nothing: field log cc_wrapper and rbe_wrapper
3.USE_RBE=false m nothing: field is empty
Bug: 281922291
Change-Id: I1bbb324752b9a2dea1ff2c9df5817559d4cec3a6
In-order to automatically detect which type of authentication to use for
RBE, we need to be able to run these binaries in bootstrap. Hence
allowlisting them.
Bug: 283828386
Change-Id: I1e0e021acc8283ec3e66c96f6676c6095bf0892b
In non-incremental build, there is no ninja_log. For this case, use
HINT_FROM_SOONG as an alternative solution.
Bug: 273947040
Test: 1.m after removing out/.ninja_log
2.check if non-incremental CI build uses HINT_FROM_SOOONG
3.check if incremental CI build uses NINJA_LOG
4.check if there is no regression in CUJ
Change-Id: I00cd216df096cb2288eeab233729acefb0d1b73c
This allows USE_BAZEL_VERSION to be set for m builds, which will use
Bazelisk for any Bazel invocations during those builds.
This should be used only for manual debugging, typically to either test
new Bazel features, verify Bazel compatibility with Android, or culprit
find new Bazel breakages.
Test: Manually run builds with USE_BAZEL_VERSION, toggled off and on to
ensure the build was rerun. Tested with a broken commit, a working
commit, and 'last_green' special term
Change-Id: I8b475dca5c8d4bd849ee3724a8c3aca9b631bcb8
