Now that tests don't need to specify every path passed to
PathForSource or PathForModuleSrc, remove most of them from
java.TestConfig. Leave a few that are globbed by lots of tests,
and move a few that are globbed by a single test into the tests.
Test: all soong tests
Change-Id: Ica91d7203a6a7dbca0fd4fed84c78f149b8699e1
As far as I can tell, annotations_enabled does not require use of
merge_annotations_dir (although it may have done in the past).
Bug: 157010342
Test: m
Change-Id: I6705522774203b4566f58679bbc2f0c17422c1dd
Merged-In: I6705522774203b4566f58679bbc2f0c17422c1dd
(cherry picked from commit c5e13279ad)
Previously, droiddoc was using SdkImplementationJars() to get a JAR to
add to the classpath in order to resolve unknown references in the
source.
Given that SdkHeaderJars() returns jars created by Turbine which are
(for compilation at least) functionally identical to the implementation
jars there is no point in using the implementation jars.
Bug: 148080325
Test: m nothing
Merged-In: I2b718cc1445c04e849dcb0b1f53bba2b0bd90c95
Change-Id: I2b718cc1445c04e849dcb0b1f53bba2b0bd90c95
(cherry picked from commit 649dadfb87)
Previously, droiddoc was using SdkImplementationJars() to get a JAR to
add to the classpath in order to resolve unknown references in the
source.
Given that SdkHeaderJars() returns jars created by Turbine which are
(for compilation at least) functionally identical to the implementation
jars there is no point in using the implementation jars.
Bug: 148080325
Test: m nothing
Change-Id: I2b718cc1445c04e849dcb0b1f53bba2b0bd90c95
The scopePaths struct is used by both java_sdk_library and its prebuilt
but was not populated in the same way. This change addresses those
discrepancies in preparation for a follow up change which will allow
access to some of those fields through OutputFileProvider.
Changes:
* Document the scopePaths field and struct.
* Switch those fields that may not be fully populated from Paths to
OptionalPath to make that 100% clear and protect against unchecked
use.
* Switch java_sdk_library_import to use the dependency extraction
mechanism driven by the dependency tag. This should actually have
been part of the change that added that mechanism.
* Only create prebuilt_stubs_sources if sources have been provided.
* Add dependencies from java_sdk_library_import on its stubs source
child modules if sources have been provided. That will ensure the
stubsSrcJar field is updated.
* Updates current/removedApiFilePath if provided for the scope in
java_sdk_library_import.
* Extracts ApiStubsSrcProvider from ApiStubsProvider to allow it to
be implemented by PrebuiltStubsSources so that it can provide access
to the stubs src jar that it creates.
Test: m nothing
Bug: 148080325
Bug: 155164730
(cherry picked from commit 0f8faffdc0)
Change-Id: Ib56ca608d6fc1357d3d89e9c4cfed6ff8da11735
The scopePaths struct is used by both java_sdk_library and its prebuilt
but was not populated in the same way. This change addresses those
discrepancies in preparation for a follow up change which will allow
access to some of those fields through OutputFileProvider.
Changes:
* Document the scopePaths field and struct.
* Switch those fields that may not be fully populated from Paths to
OptionalPath to make that 100% clear and protect against unchecked
use.
* Switch java_sdk_library_import to use the dependency extraction
mechanism driven by the dependency tag. This should actually have
been part of the change that added that mechanism.
* Only create prebuilt_stubs_sources if sources have been provided.
* Add dependencies from java_sdk_library_import on its stubs source
child modules if sources have been provided. That will ensure the
stubsSrcJar field is updated.
* Updates current/removedApiFilePath if provided for the scope in
java_sdk_library_import.
* Extracts ApiStubsSrcProvider from ApiStubsProvider to allow it to
be implemented by PrebuiltStubsSources so that it can provide access
to the stubs src jar that it creates.
Test: m nothing
Bug: 148080325
Bug: 155164730
Merged-In: Ic5bf884b2b1e79841843e7c3b4642796ecd49f5d
Change-Id: Ic5bf884b2b1e79841843e7c3b4642796ecd49f5d
(cherry picked from commit 0f8faffdc0)
As far as I can tell, annotations_enabled does not require use of
merge_annotations_dir (although it may have done in the past).
Bug: 157010342
Test: m
Change-Id: I6705522774203b4566f58679bbc2f0c17422c1dd
The scopePaths struct is used by both java_sdk_library and its prebuilt
but was not populated in the same way. This change addresses those
discrepancies in preparation for a follow up change which will allow
access to some of those fields through OutputFileProvider.
Changes:
* Document the scopePaths field and struct.
* Switch those fields that may not be fully populated from Paths to
OptionalPath to make that 100% clear and protect against unchecked
use.
* Switch java_sdk_library_import to use the dependency extraction
mechanism driven by the dependency tag. This should actually have
been part of the change that added that mechanism.
* Only create prebuilt_stubs_sources if sources have been provided.
* Add dependencies from java_sdk_library_import on its stubs source
child modules if sources have been provided. That will ensure the
stubsSrcJar field is updated.
* Updates current/removedApiFilePath if provided for the scope in
java_sdk_library_import.
* Extracts ApiStubsSrcProvider from ApiStubsProvider to allow it to
be implemented by PrebuiltStubsSources so that it can provide access
to the stubs src jar that it creates.
Test: m nothing
Bug: 148080325
Bug: 155164730
Change-Id: Ic5bf884b2b1e79841843e7c3b4642796ecd49f5d
The space after the backtick prevents it working when copy-pasting it
into the shell.
Test: create lint error => m => cp/pasted command runs successfully
Merged-In: I42b8b60d01dcaed34dbde0390eb1691d656a32cf
Change-Id: I42b8b60d01dcaed34dbde0390eb1691d656a32cf
(cherry picked from commit 3361a294c0)
// Added for rvc-dev. Used this bug as it is the bug that needs all the build changes.
Bug: 155164730
Change-Id: I42b8b60d01dcaed34dbde0390eb1691d656a32cf
Adds api_lint.enabled property to control whether API linting should be
performed.
Test: m checkapi
Bug: 156126315
Merged-In: I87ca5a942228cf6af1a9939f0334d6fc46c39a63
Change-Id: I87ca5a942228cf6af1a9939f0334d6fc46c39a63
(cherry picked from commit 160fe41c39)
Adds api_lint.enabled property to control whether API linting should be
performed.
Test: m checkapi
Bug: 156126315
Change-Id: I87ca5a942228cf6af1a9939f0334d6fc46c39a63
The space after the backtick prevents it working when copy-pasting it
into the shell.
Test: create lint error => m => cp/pasted command runs successfully
Change-Id: I42b8b60d01dcaed34dbde0390eb1691d656a32cf
Minor refactoring of checkMergeZip(string) -> checkMergeZips(...string)
to allow testing of multiple merge zips.
Bug: 153443117
Test: m nothing
Merged-In: I8db00f611ced15f8476ba16f2834a72e8c913596
Change-Id: I8db00f611ced15f8476ba16f2834a72e8c913596
(cherry picked from commit 3d1248ceb6)
This CL merges the biggest three metalava invocations --
stub and signature file generation, api lint, and "check released" --
into one call.
For each of the existing separate rules for api lint and check released this change:
1) Stopped creating a separate rule containing its own metalava invocation.
2) Moved the code for creating the rule earlier so it can add extra flags to the combined metalava command.
3) Moved the message handling into metalava, allowing the message to be passed in.
4) Added a flag to record whether the specific check was needed so that you can separate the timestamp file creation out to run after the merged metalava command.
A couple of minor bug fixes and clarifications.
Bug: 151160048
Test: "m" and treehugger
Test: Apply https://android-review.googlesource.com/c/platform/frameworks/base/+/1295541 and run `NINJA_ARGS="-k 999" m checkapi`
-> Make sure there are 4 kinds of lint failures ("AddedFinal" and "VisiblySynchronized") with the valid error messages, from:
- api-stubs-docs
- system-api-stubs-docs
- test-api-stubs-docs
- module-lib-api-
Test: Run the 4 cp commands shown by lint
-> Make sure the following 4 baseline files are updated:
frameworks/base/api/lint-baseline.txt
frameworks/base/api/module-lib-lint-baseline.txt
frameworks/base/api/system-lint-baseline.txt
frameworks/base/api/test-lint-baseline.txt
Test: Then run `NINJA_ARGS="-k 999" m checkapi` again.
-> Make sure the API lint errors are gone
-> Make sure "api-stubs-docs" shows the "You have tried to change the API from what has been
previously released in ..." error. (because of "AddedFinal")
-> Make sure it the other 3 API surfaces show the "You have tried to change the API from
what has been previously approved" error.
Test: Remove "final" from Intent.java and run "NINJA_ARGS="-k 999" m checkapi" again.
-> This time, all the 4 API surfaces say "You have tried to change the API from
what has been previously approved" error."
Test: Run the 4 "make *-update-current-api" commands shown in the above errors and "NINJA_ARGS="-k 999" m checkapi"
-> The exact command is:
$ make \
module-lib-api-update-current-api \
api-stubs-docs-update-current-api \
test-api-stubs-docs-update-current-api \
system-api-stubs-docs-update-current-api
-> Make sure frameworks/base/api/*-current.txt are properly updated.
Test: Run "m update-api"
-> Make sure no text signature files get updated.
Test: Run "m droid".
-> Make sure everything builds fine.
Change-Id: Ia1a5510b57d58748b4655473d4585636deb7f45e
Merged-in: Ia1a5510b57d58748b4655473d4585636deb7f45e
This CL merges the biggest three metalava invocations --
stub and signature file generation, api lint, and "check released" --
into one call.
For each of the existing separate rules for api lint and check released this change:
1) Stopped creating a separate rule containing its own metalava invocation.
2) Moved the code for creating the rule earlier so it can add extra flags to the combined metalava command.
3) Moved the message handling into metalava, allowing the message to be passed in.
4) Added a flag to record whether the specific check was needed so that you can separate the timestamp file creation out to run after the merged metalava command.
A couple of minor bug fixes and clarifications.
Bug: 151160048
Test: "m" and treehugger
Test: Apply https://android-review.googlesource.com/c/platform/frameworks/base/+/1295541 and run `NINJA_ARGS="-k 999" m checkapi`
-> Make sure there are 4 kinds of lint failures ("AddedFinal" and "VisiblySynchronized") with the valid error messages, from:
- api-stubs-docs
- system-api-stubs-docs
- test-api-stubs-docs
- module-lib-api-
Test: Run the 4 cp commands shown by lint
-> Make sure the following 4 baseline files are updated:
frameworks/base/api/lint-baseline.txt
frameworks/base/api/module-lib-lint-baseline.txt
frameworks/base/api/system-lint-baseline.txt
frameworks/base/api/test-lint-baseline.txt
Test: Then run `NINJA_ARGS="-k 999" m checkapi` again.
-> Make sure the API lint errors are gone
-> Make sure "api-stubs-docs" shows the "You have tried to change the API from what has been
previously released in ..." error. (because of "AddedFinal")
-> Make sure it the other 3 API surfaces show the "You have tried to change the API from
what has been previously approved" error.
Test: Remove "final" from Intent.java and run "NINJA_ARGS="-k 999" m checkapi" again.
-> This time, all the 4 API surfaces say "You have tried to change the API from
what has been previously approved" error."
Test: Run the 4 "make *-update-current-api" commands shown in the above errors and "NINJA_ARGS="-k 999" m checkapi"
-> The exact command is:
$ make \
module-lib-api-update-current-api \
api-stubs-docs-update-current-api \
test-api-stubs-docs-update-current-api \
system-api-stubs-docs-update-current-api
-> Make sure frameworks/base/api/*-current.txt are properly updated.
Test: Run "m update-api"
-> Make sure no text signature files get updated.
Test: Run "m droid".
-> Make sure everything builds fine.
Change-Id: Ia1a5510b57d58748b4655473d4585636deb7f45e
Merged-In: Ia1a5510b57d58748b4655473d4585636deb7f45e
This CL merges the biggest three metalava invocations --
stub and signature file generation, api lint, and "check released" --
into one call.
For each of the existing separate rules for api lint and check released this change:
1) Stopped creating a separate rule containing its own metalava invocation.
2) Moved the code for creating the rule earlier so it can add extra flags to the combined metalava command.
3) Moved the message handling into metalava, allowing the message to be passed in.
4) Added a flag to record whether the specific check was needed so that you can separate the timestamp file creation out to run after the merged metalava command.
A couple of minor bug fixes and clarifications.
Bug: 151160048
Test: "m" and treehugger
Test: Apply https://android-review.googlesource.com/c/platform/frameworks/base/+/1295541 and run `NINJA_ARGS="-k 999" m checkapi`
-> Make sure there are 4 kinds of lint failures ("AddedFinal" and "VisiblySynchronized") with the valid error messages, from:
- api-stubs-docs
- system-api-stubs-docs
- test-api-stubs-docs
- module-lib-api-
Test: Run the 4 cp commands shown by lint
-> Make sure the following 4 baseline files are updated:
frameworks/base/api/lint-baseline.txt
frameworks/base/api/module-lib-lint-baseline.txt
frameworks/base/api/system-lint-baseline.txt
frameworks/base/api/test-lint-baseline.txt
Test: Then run `NINJA_ARGS="-k 999" m checkapi` again.
-> Make sure the API lint errors are gone
-> Make sure "api-stubs-docs" shows the "You have tried to change the API from what has been
previously released in ..." error. (because of "AddedFinal")
-> Make sure it the other 3 API surfaces show the "You have tried to change the API from
what has been previously approved" error.
Test: Remove "final" from Intent.java and run "NINJA_ARGS="-k 999" m checkapi" again.
-> This time, all the 4 API surfaces say "You have tried to change the API from
what has been previously approved" error."
Test: Run the 4 "make *-update-current-api" commands shown in the above errors and "NINJA_ARGS="-k 999" m checkapi"
-> The exact command is:
$ make \
module-lib-api-update-current-api \
api-stubs-docs-update-current-api \
test-api-stubs-docs-update-current-api \
system-api-stubs-docs-update-current-api
-> Make sure frameworks/base/api/*-current.txt are properly updated.
Test: Run "m update-api"
-> Make sure no text signature files get updated.
Test: Run "m droid".
-> Make sure everything builds fine.
Change-Id: Ia1a5510b57d58748b4655473d4585636deb7f45e
Warnings get lost in the build spam and never get fixed. Right now is
the best time to do this, because we only track the warnings/errors
since the last released API. The API has just been frozen, so the number
of warnings is at an all-time low.
Whitelist the car lib and test stubs for now, which produce a lot of
warnings.
Bug: 154317059
Test: presubmit
Change-Id: I9aa7cb1b947c6c664f15e2bd5835d76eaac1237a
Soong was referencing the baseline file regardless of whether it was
valid or not.
Also update the lint message to match the one metalava itself prints,
which only suggests whitelisting the error if it's not possible to fix
it properly.
Bug: 154616909
Test: m (with lint error)
Change-Id: I4c6ec327a59aefe74825b4c4719393dd267ba3aa
Merged-In: I4c6ec327a59aefe74825b4c4719393dd267ba3aa
(cherry picked from commit 34ced82d2a)
Soong was referencing the baseline file regardless of whether it was
valid or not.
Also update the lint message to match the one metalava itself prints,
which only suggests whitelisting the error if it's not possible to fix
it properly.
Bug: 154616909
Test: m (with lint error)
Change-Id: I4c6ec327a59aefe74825b4c4719393dd267ba3aa
Because we already generate the latest current.txt and removed.txt
during the "main" metalava invocation (i.e. stub generation),
we don't have to use metalava for current API check.
Just use diff instead.
Bug: 151160048
Test: Remove @hide from Intent.EXTRA_INSTALL_RESULT, and do `m out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/check_current_api.timestamp`.
Result is:
```
FAILED: out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/check_current_api.timestamp
( true && diff -u -F '{ *$' frameworks/base/api/current.txt out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/api-stubs-docs_api.txt && diff -u -F '{ *$' frameworks/base/api/removed.txt out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/api-stubs-docs_removed.txt && touch out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/check_current_api.timestamp ) || ( echo -e "\n******************************\nYou have tried to change the API from what has been previously approved.\n\nTo make these errors go away, you have two choices:\n 1. You can add '@hide' javadoc comments (and remove @SystemApi/@TestApi/etc)\n to the new methods, etc. shown in the above diff.\n\n 2. You can update current.txt and/or removed.txt by executing the following command:\n make api-stubs-docs-update-current-api\n\n To submit the revised current.txt to the main Android repository,\n you will need approval.\n******************************\n" ; exit 38 )
Change-Id: Ib391ca2afb296b5c5174d755c7ffb66d3fa5810c
--- frameworks/base/api/current.txt 2020-04-16 17:50:21.911899599 -0700
+++ out/soong/.intermediates/frameworks/base/api-stubs-docs/android_common/api-stubs-docs_api.txt 2020-04-16 17:51:35.211792638 -0700
@@ -10415,6 +10415,7 @@ public class Intent implements java.lang
field public static final String EXTRA_INDEX = "android.intent.extra.INDEX";
field public static final String EXTRA_INITIAL_INTENTS = "android.intent.extra.INITIAL_INTENTS";
field public static final String EXTRA_INSTALLER_PACKAGE_NAME = "android.intent.extra.INSTALLER_PACKAGE_NAME";
+ field public static final String EXTRA_INSTALL_RESULT = "android.intent.extra.INSTALL_RESULT";
field public static final String EXTRA_INTENT = "android.intent.extra.INTENT";
field public static final String EXTRA_KEY_EVENT = "android.intent.extra.KEY_EVENT";
field public static final String EXTRA_LOCAL_ONLY = "android.intent.extra.LOCAL_ONLY";
******************************
You have tried to change the API from what has been previously approved.
To make these errors go away, you have two choices:
1. You can add '@hide' javadoc comments (and remove @SystemApi/@TestApi/etc)
to the new methods, etc. shown in the above diff.
2. You can update current.txt and/or removed.txt by executing the following command:
make api-stubs-docs-update-current-api
To submit the revised current.txt to the main Android repository,
you will need approval.
******************************
ninja: build stopped: subcommand failed.
```
Test: Remove @removed and @SystemApi from Intent.ACTION_MASTER_CLEAR, and do `m out/soong/.intermediates/frameworks/base/system-api-stubs-docs/android_common/check_current_api.timestamp`
Result is:
```
( true && diff -u -F '{ *$' frameworks/base/api/system-current.txt out/soong/.intermediates/frameworks/base/system-api-stubs-docs/android_common/system-api-stubs-docs_api.txt && diff -u -F '{ *$' frameworks/base/api/system-removed.txt out/soong/.intermediates/frameworks/base/system-api-stubs-docs/android_common/system-api-stubs-docs_removed.txt && touch out/soong/.intermediates/frameworks/base/system-api-stubs-docs/android_common/check_current_api.timestamp ) || ( echo -e "\n******************************\nYou have tried to change the API from what has been previously approved.\n\nTo make these errors go away, you have two choices:\n 1. You can add '@hide' javadoc comments (and remove @SystemApi/@TestApi/etc)\n to the new methods, etc. shown in the above diff.\n\n 2. You can update current.txt and/or removed.txt by executing the following command:\n make system-api-stubs-docs-update-current-api\n\n To submit the revised current.txt to the main Android repository,\n you will need approval.\n******************************\n" ; exit 38 )
--- frameworks/base/api/system-removed.txt 2020-04-16 17:50:21.911899599 -0700
+++ out/soong/.intermediates/frameworks/base/system-api-stubs-docs/android_common/system-api-stubs-docs_removed.txt 2020-04-16 17:53:45.319602905 -0700
@@ -55,7 +55,6 @@ package android.content {
public class Intent implements java.lang.Cloneable android.os.Parcelable {
field @Deprecated public static final String ACTION_DEVICE_INITIALIZATION_WIZARD = "android.intent.action.DEVICE_INITIALIZATION_WIZARD";
- field @Deprecated public static final String ACTION_MASTER_CLEAR = "android.intent.action.MASTER_CLEAR";
field @Deprecated public static final String ACTION_SERVICE_STATE = "android.intent.action.SERVICE_STATE";
field @Deprecated public static final String EXTRA_CDMA_DEFAULT_ROAMING_INDICATOR = "cdmaDefaultRoamingIndicator";
field @Deprecated public static final String EXTRA_CDMA_ROAMING_INDICATOR = "cdmaRoamingIndicator";
******************************
You have tried to change the API from what has been previously approved.
To make these errors go away, you have two choices:
1. You can add '@hide' javadoc comments (and remove @SystemApi/@TestApi/etc)
to the new methods, etc. shown in the above diff.
2. You can update current.txt and/or removed.txt by executing the following command:
make system-api-stubs-docs-update-current-api
To submit the revised current.txt to the main Android repository,
you will need approval.
******************************
```
Test: Add `baseline_file` to `check_api.current` and run `m`
FAILED: out/soong/build.ninja
out/soong/.bootstrap/bin/soong_build -t -l out/.module_paths/Android.bp.list -b out/soong -n out -d out/soong/build.ninja.d -globFile out/soong/.bootstrap/build-globs.ninja -o out/soong/build.ninja Android.bp
error: frameworks/base/StubLibraries.bp:86:1: module "api-stubs-docs" variant "android_common": current API check can't have a baseline file. (module %s): api-stubs-docs
ninja: build stopped: subcommand failed.
Test: With the above changes, run "m api-stubs-docs-update-current-api system-api-stubs-docs-update-current-api", make sure the API files got updated, and then run "m"
Merged-in: I47b146c6fe4caa65775ecf5425ab09b57f43f839
Change-Id: I3045bd8dc95d5f70893729ed65426d8cfc88c5ec
* changes:
Allow droidstubs to not generate any stubs
Remove conscrypt.module.intra.core.api.stubs from apex white list
Ignore PrebuiltDepTag when processing APEX contents
Stop requiring apex_available on java_library members of sdks
Add dependency tags to apex available errors
Extract DepIsInSameApex and RequiredSdks interfaces
* changes:
Replace references to droiddoc with droidstubs
Allow walkPayloadDeps visitor to control walk flow
Add apex_available to sysprop_library
Improve missing apex_available message
Split TestApexAvailable into separate tests
Use reflect.Zero(type) to get value to clear field
Sdk snapshot set compile_multilib per OsType
Remove old SdkMemberType API for creating snapshot modules
Improve consistency of handling java snapshot properties
Make new module creation API more flexible
Add abstraction for tracking compile multilib usages
Add support for using cc_library in sdk/module_exports
Extract the osTypeSpecificInfo code from module creation loop
Extract archTypeSpecificInfo code from module creation loop
Clean up the main module creation loop
Add support for cc_prebuilt_library
Refactor prebuilt to use srcs supplier function
Output properties before sets in snapshot module
Remove SdkMemberType.FinalizeModule
Follow up a review comment that was missed
Copy shared_libs and system_shared_libs to module snapshot
Support extracting common values from embedded structures
Refactor common value extraction
Copy white listed apex available settings into snapshot
Disable installation for sdk snapshot versioned prebuilts
Remove special handling of test_ apexes
Remove special handling of com.android.art.debug/release
Allow sdk members to vary by os type
Add support for multiple os types
Copy sdk_version to cc library snapshots
Refactor java_library/java_test snapshot processing
Refactor snapshot module creation
Enable androidmk processing in sdk testing
Add a nice install paths for module SDKs and exports.
Copy apex_available properties to snapshot modules
Improve documentation of CompileMultiTargets and related properties
Only check copy rules into the snapshot directory
Simplify java library sdk member code
Add CommonOS variant for sdk
Fix bug in error reporting when adding duplicate properties
Avoid invoking sdk member to add empty list of dependencies
Add windows to the list of available OS's in sdk tests
Add support for cc_library_headers in sdk/module_exports
Prune any empty property sets from the modules before transforming
Simplify cc library sdk snapshot handling of include dirs/headers
Add support for transforming a property set after its contents
Fix issues with bp transformation
