This change moves the ro.build.require.* props extracted from
TARGET_BOARD_INFO_FILE to vendor/build.prop as opposed to
system/build.prop. These typically contain what bootloader and
baseband the build requires, which are very device-specific.
Bug: 130025216
Test: make, inspect props
Test: flash blueline
Change-Id: I48642485bdc853884d465d1fe00f2ceae69a4736
Merged-In: I48642485bdc853884d465d1fe00f2ceae69a4736
The signature size will be 512 bytes when signing the payload
with 4096 bits key. This cl determines the key size with
"openssl rsa -modulus"
The new key in testdata is generated by
"openssl genrsa -out testkey 4096"
Bug: 129163830
Test: generate and verify an OTA package
Change-Id: I6662b0a0c553dc0fd84711312a1256b887e332fd
Some people apparently still talk to the network during their build.
Allow this temporarily with a BUILD_BROKEN_USES_NETWORK check.
Bug: 129992021
Test: attempt to talk to the network during the build with and without
this flag
Change-Id: I45612ad6165f92f123847b4057338c0dfc3424ee
* changes:
Only assert-max-image-size for static partitions.
sparse_img.py --get_partition_size return size of partition
Revert "Fix dynamic partition size check for devices with recovery"
Prior to this change the properties were in system/etc/default.prop.
These properties are device-specific and don't really belong on the
/system partition.
I anticipate further change to these properties in the future:
- pruning down the set of properties, as the .product. props
don't make much sense for the boot image
- moving them to the ramdisk instead
Bug: 130025216
Test: boot into recovery, observe title (shows bootimage fingerprint)
Change-Id: I9e92c1ec7068ae18fa0d709c77eac22a6b88c3d8
Default to exclude android.test.base from the bootclasspath unless the
REMOVE_ATB_FROM_BCP flag is set to false.
Bug: 73711752
Test: make droid, flash, atest -p cts/tests/signature/
Change-Id: Iabcda707ff0f0b4ec7cade1125938a2759af8f76
Like Ie413f84c545c869ee336912a7b05ca80bb968129, but for all
mainline devices.
Bug: 119800099
Test: m
Change-Id: Ief77adaea61203a013f85cf870c5350253fdb7dd
We only need to define it once. dex_preopt_libart.mk can be read
multiple times if there are many boot image.
Test: m && no warning
Bug:119800099
Change-Id: If5b8fbb0c3310eb42f676d7b5267dcee679f7e19
Looks like the reason for it existing has been fixed. It should probably
just be removed.
Bug: None
Test: WITH_TIDY=1 m
Change-Id: Ic001393da7211cd6ef2bbd5af6ef13c7fe8e00e7
assert-max-image-size doesn't make sense for
dynamic partitions, as build_image.py always find the
right size for the output image. Hence:
- build_image.py no longer need to write generated_*_info.txt
(which contains the size of the image).
- assert-max-image-size on the static BOARD_*IMAGE_PARTITION_SIZE. If
a partition is dynamic, that variable isn't set, and
assert-max-image-size becomes a no-op. If the partition is static,
assert-max-image-size checks the static partition size as it used
to be.
- Fix read-size-of-partitions to use the size of the partition by
reading the image directly (instead of using generated_*_info.txt).
For devices without AVB, with DAP enabled, and does not have
RESERVED_SIZE for partitions, because of right sizing, the original
code always warns about approaching size limits. Since such checks
doesn't make sense for dynamic partitions, remove them.
Test: builds on device with dynamic partitions
Test: builds on cuttlefish with DAP enabled (without AVB), no
more size limit warnings:
WARNING: out/target/product/vsoc_x86/vendor.img approaching size limit (X now; limit X)
Fixes: 122377935
Change-Id: I75e1b8322197cb18cf397d02aefd49d777bb6405
Also, move code from build_super_image.py to sparse_img.py.
Test: sparse_img.py on sparse and non-sparse images
Bug: 122377935
Change-Id: Ie91fdfdbb54298ea27eb20d1b5363aeb1470356e
Reason for revert: size check is removed for devices
with dynamic partitions because it doesn't make sense.
Bug: 122377935
Bug: 120043292
Bug: 124489494
Test: build cuttlefish
This reverts commit accf09b2e0.
Change-Id: I289faf11a08acbcef36924eb747a15f55124ce79
Move a couple of variables out of BoardConfigMainlineCommon
because they vary either by device or by how they build in
AOSP vs internal.
Bug: 80410283
Test: presubmit
Change-Id: Ia42df91ad8c8d8fc4618be375a17ea23896f4352
If TARGET_USERIMAGES_SPARSE_EXT_DISABLED is set, don't provide
--sparse to lpmake, so that a non-sparse super image is built.
Test: build with the flag set.
Fixes: 120041578
Change-Id: I5a26e4c793b0e2ddc89e9c38c8828ac21044e78a
