They were a bit repetitive.
In addition, make the environment checks more correct; they could
probably use an integration test or two to make sure that when the
environment changes, exactly those outputs are rebuilt that need to be,
but for now, this is an improvement already.
Test: Presubmits.
Change-Id: Idd79b81ca6975d57d00e5bf4699d266152505ff8
This makes soong_ui the only place where soong_build is invoked, thus
greatly simplifying the conceptual model of the build.
It comes with the slight limitation that now soong_docs (and queryview
and the JSON module graph) are not Make targets anymore, but I suppose
that's an acceptable loss.
The only place where someone depended on soong_docs from a Makefile is
removed in a separate change.
Test: Presubmits.
Change-Id: I3f9ac327725c15d84de725d05e3cdde1da3dcbe2
Its value is a function of the call site, so it doesn't make a lot of
sense to plumb it through the configuration.
Test: Presubmits.
Change-Id: If928b34de075969fd42932212ce9187808cbdf86
It used to be invoked from out/soong/build.ninja, which required two
soong_build invocations one after the other (ne to generate
out/soong/build.ninja, one to generate the queryview workspace). This
was slower and required some shell-quoted-in-ninja-quoted-in-Go .
Test: Presubmits.
Change-Id: Idda79c067606663b66e9f94626fa24f3b5af4114
They both used to return out/soong. Unfortunately, the tests seem to
assume the old behavior, so I had to keep tests inconsistent and I was
scared of dexpreopt, too.
Test: Presubmits.
Change-Id: Ib00c7956fd2cdb28cc11d481c17e5a3ff5ad563a
It was confusing because bootstrapping uses two configurations: the
"global" config and the special-cased bootstrap one.
This change merges them.
Test: Presubmits.
Change-Id: I82b482cbe28a343ab6991374b2a28667e1a06b48
These are: TopFile and GeneratingPrimaryBuilder.
Also re-shuffle the list of flags to make a bit more sense and finish
the rename of BuildDir and NinjaBuildDir to SoongOutDir and OutDir,
respectively.
Test: Presubmits.
Change-Id: I103ff5f09f1c0d16f695a7da5dea13b55028e33e
Before, we piggybacked on the implementation of regular soong_build and
wrote a fake build.ninja file to satisfy Ninja.
Now, instead, the JSON module graph is a a separate action in the Ninja
output file. This has the pleasant side effect that one can flip back
and forth between generating the JSON file and regular Soong without
loss of incrementality.
Side cleanup: write .d files in a slightly cleaner way.
Test: Presubmits.
Change-Id: Ia853383567b9dd31c53f3bdf56cfc8d517b498ec
These are just out/ and out/soong/ and the old names were quite
confusing.
Test: Presubmits.
Merged-In: I999ca62162062f27e449f83ffb00fa580d4065b8
Merged-In: I2fcd80a9e376a6842a06aa104a9f6f5c5e16f8c7
Change-Id: Ib481d2aac40df8da1b74174dc8ec576c1cb48be0
In particular, the writing of build-globs.ninja and the collection of
glob list files for build.ninja.d is now done outside of the Blueprint
invocation.
This is useful because RunBlueprint() is sometimes called multiple times
in a single soong_build invocation and because now glob processing is
not hidden by the machinery of Blueprint.
Test: Presubmits.
Change-Id: I6eb19b357901e452e6d1e7ce055f8a3bab4a74f4
They used to be defined in Blueprint but since it doesn't have a
separate existence anymore, we can consolidate all command line
arguments here.
Note that Blueprint is called directly from soong_ui, but that happens
by a simple Go function call and not by invoking a separate binary, so
command line arguments are not needed there.
Test: Presubmits.
Change-Id: Ifa2c101ddbe424b76fc5a508d3d41c329e7353ca
The following files are forked:
- build-globs.ninja
- The glob list files
- .d files for the glob list files
- The output file (build.ninja or the bp2build marker file)
This makes bp2build and soong_build not overwrite each other's files
they need for proper incrementality.
Test: Presubmits.
Change-Id: I69d192cbd36ecd9677f46f3fa095dfce6f872227
This fixes null bp2build builds.
When running bp2build, out/soong/.bootstrap/build-globs.ninja wasn't
generated, therefore none of the globs in out/soong/.primary/globs have
actions to generate them. This makes bp2build always re-run on a null
build, because it depends on those non-existent globs in its depfile.
Fix the above by generating a build-globs.ninja file with the globs that
bp2build encounters during conversion, and add tests to verify that null
builds and bp2build -> soong workflows correctly regenerates the
build-globs.ninja file.
Test: soong integration tests for null soong->soong, bp2build->bp2build and bp2build->soong builds.
Fixes: 193650250
Change-Id: Icfbad351dfa85541d1ea451f73e65cac87097926
This CL fixes a typo in writeFakeNinjaFile to correctly write
a fake out/soong/build.ninja and its depfile. It also modifies bootstrap
phase to *not* run the main soong build phase (which takes more than a
minute) if GENERATE_BAZEL_FILES=1.
This change has the side effect that `GENERATE_BAZEL_FILES=1 m nothing`
no longer generates the real build.ninja, which is fine because one
shouldn't be using GENERATE_BAZEL_FILES=1 for that anyway (or, use
USE_BAZEL_ANALYSIS=1). This change has no effect on mixed builds.
Time on a change to Soong or any Android.bp files:
Before: bp2build_workspace_marker (~20 seconds) + build.ninja (1 min)
After: bp2build_workspace_marker (~20 seconds)
Time on the second of two consecutive `b build //bionic/...`: 2.070s
Test: TH
Test: Soong integration tests
Change-Id: I43720641815994caba97b8d165d7c3fc254cbd06
This refactors bazel-build mode determination logic in soong_ui so it's
clearer which of three possible modes are being used in a given
invocation (NO_BAZEL, GENERATE_BUILD_FILES, or MIXED_BUILDS).
Test: bootstrap tests
Change-Id: I41d2baebf8d560c2cc42db8daa8b936101d453e3
It's under out/soong/workspace and is a symlink forest that merges BUILD
files generated by bp2build and the source tree.
bazel-* symlinks and $OUTDIR are currently ignored.
Test: Presubmits.
Change-Id: If14df23bd0f6a6f2d7d1140f95213f2aee66d652
Update the path bootstrap_test.sh uses to check for bpglob reruns
to follow the changes made for sharding globs.
Use bootstrap.GlobFileListFiles to get dependencies during bpbuild.
Test: tests/bootstrap_test.sh
Bug: 159845846
Change-Id: Ibaa7c4360881ed6b666a811bf34b19ea0cdcafe9
It was only appended to the return value, which can be done by the
caller just as well.
Test: Presubmit.
Change-Id: I962696e0dbd4c3496a0159d01d2a911675fd4217
It now handles adding .bp files and changing globs.
In order to do this, depfiles are now written separately from RunBlueprint.
This is necessary due to the confluence of a number of seemingly
unrelated factors:
1. The glob filelist dependencies are discovered in globSingleton
2. Singletons need to be registered because otherwise singleton module
types panic
3. Singletons don't work because they require mutators bp2build does not
run
Due to (1), we would need to run the glob singleton. However, due to (2)
and (3), we can't run singletons and have to run Blueprint with
StopBeforeGeneratingBuildActions, which is when the build actions
writing glob files would be generated. So what happens is:
1. When bp2build is run, the glob singleton is disabled
2. At the end of bp2build, the list of glob files is artifically added
to the depfile of the workspace marker file
3. When build.ninja is generated, the Ninja file containing the glob
list file is written by the now-active glob singleton
Test: Presubmits.
Change-Id: I3c5898d8c57c554a93520276c64a952afc912dbe
This is done by setting the INTEGRATED_BP2BUILD environment variable
when invoking the build.
Even though the name of the marker file insinuates that a Bazel
workspace is already created, this is not the case yet.
An issue that remains is that a .d file is not written for the marker
file so it won't be rebuilt if a .bp file changes. Fixing this requires
delicate surgery because writing the .d file is the result of delicate
interplay between Soong and Blueprint.
There are also a number of semi-related fixes:
- The name of soong.environment.{used,available} is now on the command
line of soong_build (soong_docs is still special cased because its
command line in the Ninja file is taken from the os.Args of
soong_build so it's not trivial to remove the --{available,used}_env
from it
- bp2build writes a separate soong.environment.used file
- I had to call SetAllowMissingDependencies() separately when creating
the android.Context for bp2build so that bp2build runs in the
integration tests (it was not obvious how not to do this)
- Fixed a number of integration tests where a command with an expected
exit code of 1 was used as the last one in a test case, thereby
breaking the test suite
Test: Presubmits.
Change-Id: Ibeb61c26022cf801dcb98505b4039151b3409873
Properly plumb the available environment to the configuration instead of
going through the global variable originalEnv.
Test: Presubmit.
Change-Id: Ia1ea753d5e72c02a0dcaa4c0b43bd6e24fc47cec
This is so that the way soong_build is invoked is simpler, which is in
turn useful so that it can be invoked multiple times within a single
build, which in turn will be used to invoke bp2build routinely (as
opposed to manually when needed)
Test: Presubmits.
Change-Id: Iddaebb05ff7bcedc0db8273192bb31284b739920
Usage: SOONG_DUMP_MODULE_GRPH_JSON=<filename> m nothing
Test: The new test case in bootstrap_test.sh .
Change-Id: I69005a75d47dff915d27187645d0cd1cbb3467ef
This makes it more easy to see what's happening under which modes. Modes
are:
- Regular builds
- Mixed mode builds
- bp2build
- soong_docs
Test: Presubmit + bootstrap_test.sh
Change-Id: I06e3fcb84986b919be1cd9eb456531259ede1183
Previously, soong.environment.used was written after build.ninja and if
the amount of time that passed between the two was long enough, Ninja
would decide that build.ninja is older than soong.environment.used and
rebuild it.
Test: test_null_build in bootstrap_test.sh in a loop.
Change-Id: I5467da487e8e8f2646644b8a7fb9549b9ff18276
This CL adds the support for specifying lists of directories in
build/soong/android/bazel.go, which are then written into
out/soong/bp2build/MANIFEST. Using this configuration,
modules/directories can either default to bp2build_available: true or
false, while still retaining the ability to opt-in or out at the module level.
It also ensures that ConvertWithBp2Build returns true iff the module
type has a registered bp2build converter.
Test: go tests
Test: demo.sh full
Test: TreeHugger presubmits for bp2build and mixed builds.
Change-Id: I0e0f6f4b1b2ec045f2f1c338f7084defc5d23a55
This is achieved by writing soong.environment.used in Main() instead of
as a side effect of a singleton. This makes a difference because build
actions are not generated when GENERATE_BAZEL_FILES=true is set,
therefore the side effect did not happen.
Arguably, Main() is made worse by this change, but I don't want to
tackle the problem of readably determining which mode soong_build is
running in in this change.
Test: Presubmits + the additional test.
Change-Id: I66af2429aedf008762173eaaa55b828b4cf4328b
It's replaced with a flag in bootstrap.Args .
Test: "m nothing" (presubmits take a full workday these days)
Change-Id: Ia0bfa2091013e389890e583c559006077806af99
This requires linking Blueprint into soong_ui. It lets us avoid the
complicated dance of Ninja files and shell scripts: now the information
as to how soong_build is built is passed directly to Blueprint using a
struct that contains all the information the command line arguments used
to contain.
The ability to run Blueprint from the command line is kept (for now).
Some variables in bootstrap/command.go needed public accessor functions
because soong_build reads them. This will be disentangled by moving the
flag parsing to soong_build.
The presence of the flag definitions in Blueprint means that soong_ui
now also accepts them. This is not a problem in practice because they
are ignored and because soong_ui itself is hidden behind a few layers of
shell scripts.
Test: Presubmits + the new bootstrap_test.sh .
Change-Id: I6dca478f356f56a8aee1e457d71439272351390b
The end goal of this exercise is to remove all mutable global state so
that multiple Blueprint instances can be run in the same process.
Test: Presubmit.
Change-Id: Idb34b0920f2c7d92efb9328ce8a78b7306f89571
If both bp2build_available and label are specified, label will be
preferred.
Initially, we copy the entire BUILD.bazel file. Eventually we may move
this to use bazel query for a more accurate result.
Test: go test *
Test: build/bazel/scripts/milestone-2/demo.sh full
Test: GENERATE_BAZEL_FILES=true m nothing
edit bionic/libc/tools/BUILD.bazel
GENERATE_BAZEL_FILES=true m nothing and verify changes picked up
Bug: 180516554
Change-Id: I43025583300e6b10d2c18032cd4a76237b578d59
In addition, make the Ninja command nicer by using backticks instead of
backslash-quoting double quotes.
Test: Manual: "m queryview"
Change-Id: I5d6e1d41424e0229bfe08e2e7eaf2fb025ed48c2
This works by setting the SOONG_UI_DELVE= environment variable to the
port on which soong_ui should accept a Delve connection on.
This is achieved by reusing the Delve execution logic between soong_ui
and soong_build.
Test: Manual.
Change-Id: Id2c1d4b6faac1a4a3918c91030ce2239f7daf54f
This lets one avoid any decisions as to when to chdir there during its
execution and leads to better sandboxing because the pwd doesn't leak to
init() functions anymore.
Test: Manual.
Change-Id: I1560da8ed3a621249426f9e8908aa890c21e13ba
Sample output:
[bp2build] cc_library_headers: 5 targets
[bp2build] cc_object: 5 targets
[bp2build] filegroup: 4 targets
[bp2build] genrule: 4 targets
[bp2build] sh_binary: 1 targets
[bp2build] Generated 19 total BUILD targets from 39270 Android.bp modules.
This CL adds an additional CodegenMetrics return value to
GenerateBazelTargets calls, which are called from bp2build, queryview,
and their tests. For this UI, we only want to use it for bp2build, and
not queryview or tests, since it's not useful for the former, and can
pollute the CLI for the latter.
Test: build/bazel/scripts/milestone-2/demo.sh
Change-Id: Ic84307a1ed1a25e360c9b23459e5449d932bc2e7
Before this change, changes to any Android.bp file would not trigger a re-run of bp2build/Soong, since the depfile for Soong's main output, the build.ninja file, didn't contain the list of Android.bp files. bp2build only reran when Soong itself changed, which happens regularly while developing bp2build, but not at all while modifying Android.bp files.
This change correctly dumps the list of all Android.bp files in the tree to the depfile for out/soong/build.ninja, therefore correctly triggering a re-run of bp2build when any Android.bp file changes.
Test: GENERATE_BAZEL_FILES=true m nothing; edit an Android.bp file; GENERATE_BAZEL_FILES=true m nothing -> successfully re-runs and regenerates out/soong/bp2build.
Test: inspect out/soong/build.ninja.d manually
Fixes: 179452534
Change-Id: Iad80c381b3afa38a4d4fafca035e46aa2a1f206a
bp2build is a Soong mode that returns as soon as the BUILD files are generated. This causes it not generate the build.ninja file, which the Ninja process executing soong_build itself expects to produce as an output. If there isn't an existing build.ninja file generated from a previous build, GENERATE_BAZEL_FILES=true m nothing will fail.
This CL generates the expected files as a workaround, and also makes GENERATE_BAZEL_FILES=true skip the Kati/Ninja steps in soong_ui since they aren't needed.
Test: rm -rf out/ && GENERATE_BAZEL_FILES=true m nothing && m libc
Fixes: 178683777
Change-Id: I2515ef7961682d2be5f096ed24831cc185165a67
The CodegenMode enum helps to differentiate between bp2build and queryview modes of generating BUILD files from the Soong module graph.
bp2build is used for generating BUILD files from an unconfigured Soong module graph for Soong->Bazel conversion, whereas QueryView is a front-end for querying the existing Soong configured module graph with Bazel query.
Test: go test
Test: TH
Change-Id: I5709f591f1ae08b2770adf272d8ce60c9ee1f46a
Implement bp2build codegen as a discrete step that runs after an
alternatively registered pipeline of mutators, instead of a
presingleton.
bp2build codegen requires a Context that supports VisitAllModules and
PathContext, so this CL also makes a BpToBuildWrapperContext that
conforms to PathContext by adding two method implementations.
Test: GENERATE_BAZEL_FILES=true m nothing && bazel query //... --config=bp2build | wc -l # 31433
Test: m queryview && bazel query //... --config=queryview # 63638
Change-Id: I0dd359746584b228046d2d0ff00895f28f9bdfc3
This CL adds a new CONVERT_TO_BAZEL env var, and a bp2build goal. It
reuses the queryview architecture, but registers no mutators before
converting to BUILD files. This gives us a blank slate of the module
graph to work with, and create a shadow/alternate pipeline of mutators
to converge the Bazel BUILD graph to be semantically equivalent with the
Android.bp graph (after apply its current set of mutators).
The command to do so is:
$ CONVERT_TO_BAZEL=true m bp2build
To not clobber with queryview, the generated files are in
out/soong/bp2build.
Test: CONVERT_TO_BAZEL=true m bp2build && bazel query --config=bp2build //...
Test: m queryview && bazel query --config=queryview //..
Test: soong tests
Test: TH presubmit
Fixes: 174465461
Signed-off-by: Jingwen Chen <jingwen@google.com>
Change-Id: I4dd0ccc73abc345d70a50ca2803d6f400cd8c863
No current use cases for soong.config and user-editable local
configuration options for Soong, so let's remove it to reduce the API
surface.
The MegaDevice configuration is used for building every module, for
every cpu variant, for every architecture, but it apparently isn't
used for a while now.
Test: m nothing
Test: TH
Fixes: 174188200
Change-Id: I2550e70ff6f9c8b57e9a7cc517d6a119a032a27a
