We've been getting these dependencies transitively through the
dependency on the object itself (which is a workaround for the lack of
dep file support in these tools). But for remote builds to work, we need
to know about these dependencies like any other object compilation.
For regular builds, this increases the size of the ninja file by a few
tens of megabytes (~1-2%).
WITH_TIDY builds were already larger (~40-50%), but are now about 90%
larger than a normal build.
Test: treehugger
Change-Id: Icdb4ca3d4d08d5706593d96d5c627149fa14fed8
For all vndk snapshot libraries, header files exported by the libraries
will be included to the snapshot. Android.bp will contain necessary
information to link against/install vndk snapshot libraires:
export_include_dirs, export_system_include_dirs, export_flags, and
relative_install_path.
Bug: 132818174
Test: 1) m nothing && mv out/soong/build.ninja /tmp && m nothing &&
diff -u -u out/soong/build.ninja /tmp/build.ninja
Test: 2) VNDK_SNAPSHOT_BUILD_ARTIFACTS=true \
development/vndk/snapshot/build.sh
Test: 3) development/vndk/snasphot/update.py
Test: 4) see contents of Android.bp and include directories
Change-Id: I791ab181545eb483242b04446afd40958bbb2b17
The NDK is built like this. Having it for app builds within the Android
build system allows us to distinguish platform code from app code.
This is specifically to distinguish AIDL interfaces using libbinder_ndk.
'myBinder-ndk_platform' libs will use additional functionality that
'myBinder-ndk' libs won't use (in the future, these may be separate
variants with the same name, see b/121157555).
Bug: 136027762
Test: using this to distinuish code in NDK vs platform code
Change-Id: I4de6f2e066982e7573ffd28cda44407d9e5648e4
This change fixes a problem in sanitizerMutator where a module is linked
with of non-sanitized variant of a lib at build-time, but is linked with
the sanitized variant of the lib at run-time.
This happened because, for each sanitizer type, every shared libs are
split into non-sanitized and sanitized variants, and then either of the
variants are suppressed from Make so that it isn't installed to the
device.
This change fixes the problem by NOT splitting for shared libs; only the
sanitized variant is created if needed. Header libs, static libs and
shared libs for a few sanitizer types (asan/fuzzer) are however split
into two. This is because the static and headers libs become part of the
depending module, and asan/fuzzer require that the depending module and
the dependant module should be compiled for the same sanitizer.
Bug: 138103882
Bug: 138426065
Test: m com.android.runtime.debug
Check that libziparchive exists under both
/system/apex/com.android.runtime/[lib|lib64]
Change-Id: Ia447785c485c0d049e19477b32bc638bfe6f1608
build/soong/apex is highly coupled with system/apex.
So it is reasonable to "import" presubmit tests from system/apex.
Test: atest --test-mapping build/soong/apex
Bug: 138984456
Change-Id: I7447e04a63b86486daef0f2a7642842101c0029f
Android build generates 180K+ zip files that are to be merged and the
result passed to the indexing pipeline to generate the source code
cross-reference. Their names cannot be passed on the command line,
hence the need for this change. That required extensive changes to
the code as it no longer can be assumed that all the input files can
be kept open.
Bug: 121267023
Test: internal + treehugger + combine index files
Change-Id: I0a829f96ff7187ad967fb6b8cede387501ec57cc
Currently it extracts from the provided jar file compat/compat_config.xml
(generated by compat-changeid-annotation-processor) and installs on
/system/etc/sysconfig.
Future improvements:
- Merge all the configs going for the system image into one, so that
duplicate change ids across modules are failing the build instead of
runtime.
- Support uploading the config onto APEX for APEX modules.
Test: flashed device locally, config files found and read by
com.android.server.compat.CompatConfig.
Bug: 138222363
Change-Id: I64b11fdc466f746702e7e73f612794e024de2288
Allow modules to depend on the proguard dictionary of another module
using module{.proguard_map}.
Bug: 122332855
Test: m checkbuild
Change-Id: I918b487872c1a8ef8a51c0b994277efb0512d157
Allow modules to mark themselves as InstallBypassMake, which will
cause android.PathForModuleInstall to return a path in $OUT_DIR
instead of $OUT_DIR/soong. This can be used for modules that
can handle installation to the final location on their own. The
main blocker for most modules is support for the "required" property,
which requires adding dependencies on the installed location of
other modules.
Bug: 122332855
Test: m checkbuild
Change-Id: I85238d937ff30335167d4b3fec79bbefc734b5e1
Adds a neverallow InDirectDeps(deps) verb that will allow a neverallow
rule to restrict access to a specific dependency, irrespective of how
it is specified.
Bug: 137543088
Test: m nothing
Change-Id: I0c6bb702d55175e9b78b79e86e96924c5dd83efa
Bug: 131771163
LTO is currently broken when building with SANITIZE_TARGET=fuzzer. The
compiler bug is currently being addressed upstream (see linked bug), but
we have applied a local workaround in the build system to disable LTO
when building using the fuzzer config.
There is a bug here however. In the sanitizer mutator we explicitly
remove -flto and add -fno-lto. The sanitizer mutator runs after the LTO
mutator, so (in general) this works just fine. The problem exists when a
target specifies an explicit 'lto: { ... }' flag in their Android.bp. In
this case, the sanitizer mutator disables LTO, then the flags are parsed
from the Android.bp, re-enabling LTO.
This patch fixes this issue. If the sanitizer mutator has added the
-fsanitize=fuzzer-no-link flags, then the LTO mutator won't add the LTO
flags after this fact.
Test: Build a target with SANITIZE_TARGET=fuzzer (or a cc_fuzz target),
where there is an explitiy 'lto: { ... }' and watch it now succeed in
building.
Change-Id: I6643909417f666539c23469816926b806e204b06
When no-vendor-variant VNDK is enabled,the vendor variant of VNDK
libraries are not installed.This should not be fit for recovery module.
Recovery module deps should be always installed.
Bug: 138812833
Test: `adb reboot recovery;` recovery mode boot ok
Change-Id: I0c3b8ac0fb0176677ddd94ba7216dd068f2eb81b
This tool is used to modify apex_manifest.json when building apex
module.
Here's the usage:
usage: jsonmodify [-h] [-o output] [-v path value] [-s path value]
[-r path] [-a path [value ...]]
[input]
positional arguments:
input JSON file
optional arguments:
-h, --help show this help message and exit
-o output, --out output
write result to a file. If omitted, print to stdout
-v path value, --value path value
set value of the key specified by path. If path
doesn't exist, creates new one.
-s path value, --replace path value
replace value of the key specified by path. If path
doesn't exist, no op.
-r path, --remove path
remove the key specified by path. If path doesn't
exist, no op.
-a path [value ...], --append_list path [value ...]
append values to the list specified by path. If path
doesn't exist, creates new list for it.
Bug: 138695532
Test: m jsonmodify
Test: echo {} | jsonmodify -v name hello -a list.nested a b c
{
"name": "hello",
"list": {
"nested": [
"a",
"b",
"c"
]
}
}
Change-Id: I2cd043c614b3ad2306a0c27ccee302633c6d2525
To generate ld.config.txt dynamically(b/123722631), each APEX should
provide some dependency information:
a) list of libraries which other APEXes(or system) can use from this apex
b) list of libraries which this apex uses from other APEXes(or system)
This change puts dependency information in apex_manifest.json at
build-time with two additional keys:
a) provideNativeLibs
b) requireNativeLibs
Bug: 138695532
Test: m (runs soong tests)
Test: find $OUT/apex -name apex_manifest.json -exec cat {} \;
(shows contents of apex_manifest.json files)
Change-Id: Iaad12c8c35454222ad177ce923cce76ef12a8a5a
For some APEX packages (i.e. the Runtime Testing APEX), the set of
files to copy can be so large that the copy commands (which are part
of the Ninja shell command executed for an APEX package) may exceed
the maximum length of argument to the exec() functions (ARG_MAX). To
work around this limitation, record these copy commands in a Ninja
response file (rspfile) and `source` this file in the Ninja command to
execute them.
Test: m nothing (`apex/apex_test.go` amended)
Test: m com.android.runtime.testing (with CL https://android-review.googlesource.com/c/platform/art/+/1008034/ cherry-picked)
Bug: 129534335
Change-Id: I09ff2d9cf66bfd4cbc12cb724a45d455d08da0b2
